Máy phân tích mạng vector cầm tay Transcom T5231A (300 kHz - 8.0 GHz) | EMIN.VN

Máy phân tích mạng vector cầm tay Transcom T5231A (300 kHz - 8.0 GHz)

Name: Máy phân tích mạng vector cầm tay Transcom T5231A (300 kHz - 8.0 GHz)
Brand: TRANSCOM

Có sẵn: 0 Cái

Hãng sản xuấtTRANSCOM

ModelT5231A (300 kHz - 8.0 GHz)

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Key Features

T5281A is a high performance hand held VNA, large frequency range, large dynamic range ,low Noise level, low trace noise, it can be widely used for microwave device measurement in wireless communication, broadcast, TV device, radar device and semiconductor.

Large frequency range: 300kHz to 8.0GHz
Large dynamic range: >125dB (IFBW=10Hz), 130dB typ.
Low noise level: <-120dbm ifbw="10Hz)</li">
Low trace noise: 1mdB rms (IFBW=3kHz)
High measurement speed: 125μs/point (IFBW=30kHz)
High effective directivity: >45dB
Remote Control: LAN/GPIB/USB
Very low power consumption
“One-key-test” solution

Manuafacture: Transcom

Measurement Range	Product Name
Impedance	50Ω or 75Ω
Test port connector	N-type, female
Number of test ports	2
Frequency range	300kHz to 8GHz
Full CW frequency accuracy	±5×10^-6
Frequency resolution	1Hz
Number of measurement points	2 to 10001
Measurement bandwidths	1Hz to 30kHz (with 1/1.5/2/3/5/7 steps)
Dynamic range (IF bandwidth 10 Hz)	130dB, typ.135dB
Measurement Speed
Measurement time per point		100μs
Source to receiver port switchover time		＜10ms
Typical cycle time versus number of measurement points（IFBW 30kHz）		51	201	401	1601
Uncorrected（Start 300 kHz, stop 10 MHz）		13.1ms	51.3ms	102.3ms	408.3ms
Full two-port calibration（Start 300 kHz, stop 10 MHz）		45.5ms	122.0ms	230.5ms	840.5ms
Uncorrected（Start 10 MHz, stop 3 GHz）		6.5ms	21.1ms	40.5ms	157.7ms
Full two-port calibration（Start 10 MHz, stop 3 GHz）		32.4ms	61.7ms	100.3ms	333.0ms