Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

1. Tốc độ đo: 1 phút- 2 phút cho cuộn dây một pha
2. Điện áp đầu ra: Vpp-25V, tự động điều chỉnh khi kiểm tra
3. Trở kháng đầu ra: 50Ω
4. Trở kháng đầu vào: 1MΩ (Kênh phản hồi có điện trở phù hợp 50Ω)
5. Dải quét tần số: 10Hz-2 MHz
6. Độ chính xác tần số: 0,001%
7. Phương pháp quét tần số: tuyến tính hoặc logarit, khoảng quét tần số và số điểm quét có thể tự do cài đặt
8. Hiển thị đường cong: đường cong Mag-freq
9. Dải đo động: -100dB~20dB
10. Nguồn cấp: AC100-240V 50/60Hz
Product features:
- Characteristics of transformer winding are measured with frequency sweep method. Deformations of windings such as distortion, swell or displacement of 6kV and above transformer are measured by detecting amplitude-frequency response characteristics of each winding, not requiring lifting of transformer enclosure or disintegration.
- Quick measuring, measuring of a single winding is within 2 minutes.
- High frequency accuracy, higher than 0.001%.
- Digital frequency synthesis, with higher frequency stability.
- 5000V voltage isolation fully protects safety of the testing computer.
- Able to load 9 curves at the same time and automatically calculate parameters of each curve and diagnose winding deformations to provide the reference diagnosis conclusion.
- Analysis software has powerful functions and software and hardware indicators satisfy national standard DL/T911-2016/IEC60076-18.
- Software management is humanized with high degree of intelligence. You only need to click one key to complete all measurements after setting of parameters.