HILO-test RW-CE7 Compact EMC-Tester (100 kHz; 0.5 μs)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input/output: Switch / 10 V

Connector for external safety interlock loop: 24 V =

External red and green warning lamps: 24 V=, 40 mA

Mains power: 90 V - 264 V, 50/60 Hz

Dimensions of desk top case (W × H × D): 450 × 330 × 500 mm³

Weight: 25 kg

Internal 1-phased de-/coupling network (CDN)

Coupling-/decoupling network for power supply lines: L1, N, PE

Nominal voltage, nominal current: 300 V, 16 A ac/dc ≈ / 300 V, 16 A =

Coupling impedance (depending on the generator): 33 nF / 18 µF / 9 µF + 10 Ω

RINGWAVE (option) acc. to IEC 61000-4-12: 2017

Impulse output voltage, adjustable: 0.2 - 7.0 kV ± 10 %

Output wave form acc. to IEC 61000-4-12: 0.5 µs / 100 kHz

Oscillation frequency: 100 kHz ± 10%

Voltage rise time to the first peak (open): 0.5 µs ± 30%

Current rise time to the first peak (short): ≤ 1 µs

Decaying voltage:

Ratio of Pk2 to Pk1: 0.4 < ratio < 1.1

Ratio of Pk3 to Pk2: 0.4 < ratio < 0.8

Ratio of Pk4 to Pk3: 0.4 < ratio < 0.8

Polarity of output voltage: pos / neg, selectable

Maximum stored energy: 12 J

Repetition rate, max.: 60 transients per minute

High-voltage output (HV-OUT), impedance selectable:

PFN 1: Series resistor 12 Ω (10+2 Ω)

PFN 2: Series resistor 30 Ω (10+20 Ω)

Monitor output for pulse output voltage: Ratio = 1000:1 ± 5%

Mains synchronous trigger: Phase shifting, digitally selectable 0 - 360° ±5°

Datasheet