快速支持
直接联系认证专家
It is suitable for the test method proposed according to GB/T 11143 standard to evaluate the anti-rust ability of mineral oil with inhibitor, especially steam turbine oil, on iron parts when mixed with water. It is also suitable for evaluating the rust resistance of other oils, such as hydraulic oils, circulating oils and liquids heavier than water, to iron components.
Specification
1, power supply voltage: AC(220±10%)V, 50Hz;
2, temperature control range: (room temperature ~ 100)℃;
3, temperature control accuracy: ±1℃;
4, control time range: 1 minute to 24 hours arbitrary setting;
5, mixing motor speed: 1400r/min;
6, sample mixing speed: (1000±50)r/min;
7. Sample holes: 4.
Instrument
The instrument is designed and manufactured according to the requirements of GB/T 11143 standard of the People’s Republic of China “Test method for anti-rust performance of mineral oil in the presence of water”. It is suitable for the test method proposed according to GB/T 11143 standard to evaluate the anti-rust ability of mineral oil with inhibitor, especially steam turbine oil, on iron parts when mixed with water. It is also suitable for evaluating the rust resistance of other oils, such as hydraulic oils, circulating oils and liquids heavier than water, to iron components.
SYD-11143 Lubricating Oil Rust Tester
Main technical features
1, the use of digital temperature controller, heater, electric mixer to form a constant temperature bath, the temperature in the bath is uniform.
2, with a timer, for the sample test control setting and automatic timing.
3, with 4 sample test holes, can be tested on 4 samples at the same time, high test efficiency.
