快速支持
直接联系认证专家
STANDARD WAVEFORMS
- SINE
Frequency Range: 1µHz to 50MHz
Frequency Resolution: 1µHz, 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Amplitude Flatness Relative to 1kHz: <100kHz 0.1dB, <5MHz 0.15dB, <25MHz 0.3dB, <50MHz 0.5dB
Harmonic Distortion: ≤1 Vp-p | ≥ 1Vp-p
DC to 20kHz -65dBc -65dBc
20kHz to 100kHz -60dBc -60dBc
100kHz to 1MHz -45dBc -45dBc
1MHz to 25MHz -40dBc -35dBc
25MHz to 50MHz -40dBc -28dBc
Non-Harmonic Spurii: <–60dBc to 1MHz, <–60dBc + 6dB/octave 1MHz to 50MHz
Phase Noise: -115dBc/Hz, typical (10kHz offset)
- SQUARE
Frequency Range: 1µHz to 50MHz
Resolution: 1µHz, 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Rise and Fall Times: <8ns
Overshoot: <5%
- RAMP & TRIANGLE
Frequency Range: 1µHz to 1MHz
Resolution: 1µHz, 12 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Linearity Error: <0.1% to 30 kHz
- PULSE
Frequency Range: 500 µHz to 12.5MHz
Resolution: 1µHz , 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Overshoot: <5%
Edge Range: <8ns to 40µs
Delay Range: 0ns to 2000s
PRBS WAVEFORMS
Sequence Length: 7, 9, 11, 15, 20, or 23 stages (127 to 8,388,607 bit length)
Bit Rate: 1µbps to 50Mbps
Rise/Fall Times: Rise/Fall times can be varied (rise time = fall time).
Edge Range: <8ns to 40µs
OUTPUTS
- Main Output
Output Impedance: 50Ω
Amplitude: 20mV to 20Vp-p open circuit (10mV to 10Vp-p into 50Ω)
Amplitude Accuracy: 2% ±1mV at 1kHz into 50Ω.
DC Offset Range: ±10V. DC offset plus signal peak limited to ±10V from 50Ω.
DC Offset Accuracy: Typically 3% ±10mV.
Resolution: 3 digits or 1mV for both Amplitude and DC Offset
INPUTS
- Trig In
Frequency Range: DC - 1MHz.
Minimum Pulse Width: 50ns
Input Impedance: 10k W
- External Modulation Input (for AM, FM, PM, PWM)
Voltage Range: ± 5V full scale
Input Impedance: 5k W typical
Bandwidth: DC to 20kHz
- Ref Clock Input
Input for an external 10MHz reference clock
Voltage Range: 1Vpp – 5Vpp
Maximum Voltage: +5V
Minimum Voltage: -1V
GENERAL SPECIFICATIONS
AC Supply: AC Input: 100-240VAC ±10% 50/60Hz; 100-120VAC ±10% 400Hz; 60VA max. Installation Category II
Temperature & Environmental: Operating Range: +5ºC to +40ºC, 20% to 80% RH
Storage Range: -20ºC to + 60ºC
Safety & EMC: Safety: Complies with EN61010-1
EMC: Complies with EN61326
Physical: Size: Bench top use (H;W;L): 97mm (2.62”); 250mm (9.84”); 295mm (11.62”).
Rack mounted use (H;W;L): 86.5mm (3.4”); 213.5mm (8.4”); 69mm (10.59”); i.e. ½-rack x 2U.
Weight: 2.7 kg (5.95 lbs)
OPTIONS
- Rack Mount (RM200A): 19 inch 2U rack mount suitable for one or two generators.
- GPIB Interface (Option TG-GPIB): Retro-fittable GPIB (IEEE-488) interface card.
