emin

GOTT GOTT-BTCT-1205 Bench Top Cooling Tower System

  • 制造商: GOTT
    Model: GOTT-BTCT-1205
    P/N: 640-000
    来源: Malaysia
    保障: 12 month
    • 报价要求 报价要求
  • 联系
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      

PRODUCT SPECIFICATION

•  Basic Unit 

• Impact Resistant Plastic 

• Housing load tank with 0.5 and 1.0 kW heaters 

• Float level control, make-up tank, bronze circulating pump, air fan, electrical control panel with digital temperature indicator 

• Packed Column 'B' Transparent P.V.C with eight decks of inclined laminated plastic 

• packing, water distribution troughs and pressure tappings 

• Packing density 110m2 per m3 

• Cap: Transparent P.V.C fitted with 80mm dia 

• Sharp edged orifice, droplet arrester and water distributor

•  Digital Temperature indicator Channel selector switch for all wet bulb, dry bulb and water temperature 

• Variable area water flowmeter and manometer for airflow 

• Additional Columns 

Column A: As column B but with a packing density of 77m2 per m3 

Column C: As column B but with a packing density of 200m2 per m3 

Column D: empty Column 

Column E: (Packing Characteristics Column). Similar to clumn C but with packing arranged to allow measurement of air and water properties within column. Fitted with thermocouple sensors, selector switch and digital thermometer

EXPERIMENT TOPICS:

• Observation of water flow pattern and distribution 

• Measurement of all ''end states'', and rates of water, air and make -up 

• Plotting of end states on a psychrometric chart and the application of the steady flow equation to draw up energy balances

• Investigation of performance at: (a) A range of process cooling loads (b) A range of inlet temperatures

Manuals: 

(1) All manuals are written in English 

(2) Model Answer 

(3) Teaching Manuals

Details

Datasheet


INTRODUCTION 

The GOTT-BTCT-1205 has been found in an industrial system serviced by a forced draught cooling tower. The unit incorporates a process load, circulating pump, packed column, water distribution, volume control system and fan. 

The standard instrumentation allows measurement of the air, circulating water mass flow rate and all end state temperatures using wet and dry bulb thermocouples. The evaporation rates under varying load and flow conditions can also be investigated. The unit is supplied complete with one column of packing density 110m2/m3. The columns with different packing densities together with a column enabling the construction of driving force diagrams and an empty column for student project work are available as optional items

FEATURES

A: 1.6 kW. 220-240 Volts, Single Phase 50Hz (with earth/ground) OR 

B: 1.6 kW. 110-120 Volts, Single Phase, 60Hz (with earth/ground)

Water: Demineralized or distilled Approx. 2kg/hour


  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会