GOTT GOTT-AD-7000 模拟数字培训设备套 (16 BITS)

SOLDER LESS BREADBOARD

Interconnected with 2820 tie points nickel plated contact, fitted all DIP sizes and all components with lead and solid wire AWG # 22-30 (0.3- 0.8mm). It can be changed and replaced for different purpose and can be connected with demonstration panel. Therefore, it is very convenient for both teachers and students.

DC POWER SUPPLY

Fixed DC output : ±5V, 1A 

Variable DC output : 0V to ± 15V, 1 A

POTENTIOMETERS

Variable Resistor VR1 = 1k 

Variable Resistor VR2 = 100k

FUNCTION GENERATOR

-Frequency range : 1Hz -10Hz 

: 10Hz -100Hz 

: 100Hz -1kHz 

: 1kHz -10kHz 

: 10kHz -100kHz 

- Amplitude : Sine wave output 0 - 10 Vpp variable 

                       : Triangle wave output 0 - 10 Vpp variable 

                        : Square wave output 0 - 10 Vpp variable 

                         : TTL mode output 5 Vpp

16 BITS DATA SWITCHES

 16pcs toggle switches and corresponding output point. When switch is set at down position, the output is LO level; contrarily, when switch is set at up position, the output is HI level.

SPEAKER: 2.25 inch 8 ohm 0.25W speaker and etc

FOUR CHANNEL ADAPTOR

Both of the 2 banana sockets' & 2 BNC jacks' point tips are changeable. It is suitable to be connected with peripherals.

2 DIGITS OF 7 SEGMENTS LED DISPLAY

( i ) Output display 

• Numerical designs and resultant displays 

( ii ) Function Tables

2 PULSE SWITCHES

With 2 sets of output (Ᾱ, A, B, B) and 2pcs push buttons contain switches debouncer for eliminating the bounce caused by switch from open to close/ from close to open position

UNIVERSAL CONNECTOR FIXED HOLDER

It reserves universal connector fixed holder on the panel in order to be connected with various universal connectors, which are available as below as optional item : 

• Straight header 60 pin 

• Card edge connector 2.54 mm 62 pin 

• D sub 25 pin connector, male & female 

• Card edge connector 3.96 mm 56 pin 

• Dip sockets connector 28 pin & 40 pin

16 BITS LED DISPLAY

16 red LED's separate input terminals. The LED will be lighted on when input is at HI level, and it will be lighted off when it is at no input or at LO level

ACCESSORIES:

1) Power cord 

2) Pin : 18pcs – 20cm 

3) Pin : 18pcs – 12cm 

4) User manual

Manuals : 

(1) All manuals are written in English 

(2) Model Answer 

(3) Teaching Manuals

ACCESSORIES:

1) Power cord 

2) Pin: 18pcs – 20cm 

3) Pin: 18pcs – 12cm 

4) User manual 

ADDITIONAL MODULE: ELECTRONIC MODULE - GOTT-EM-01- Code 600-000