E-Field Meter Ranges:
± 20kV/m; ± 200kV/m und ± 1MV/m
Distance 1cm is switched on (for MK 023)
After pressing the switch the maximum pos. and neg. Measure Values are displayed (Walking Test). By pressing the switch again the values will be reset and starts again.
No zero drift
Therefore a zero adjustment is not needed before each measurement.
distance 1cm: 0 to 10kV
distance 2cm: 0 to 20kV
distance 5cm: 0 to 50kV
distance 10cm: 0 to 100kV
distance 20cm: 0 to 200kV
Dimensions: 122mm x 70mm x 26mm ( L x W x H )
Weight: approx. 130 g (without battery)
Power supply: 9V Alkali battery IEC 6F22
2-line alphanumeric LC-display with 12 digits each
The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line.
Scope of delivery:
Transport case with conductive foam interior
3 pc. 9V NiMH storage batteries
Plug-in charger for 9V storage batteries
Grounding cable 1,5m and 1m
In combination with the Charge Plate Set CPS 022 the EFM 022 becomes a charge plate monitor for the supervision of air ionizers according to EN 100015 and EOS/ESD S.3.1
The capacity of the charging electrode complies to the norms.
The discharge time from ±1000V to ±100V is measured with the EFM 022's integrated timer. The charging takes place with a external HV charger. Lieferumfang