E-Field Meter Ranges:
± 20kV/m; ± 200kV/m und ± 1MV/m
Important ! Only in ths Mode the analog interface is switched on !
Distance 1cm is switched on (for MK 023)
After pressing the switch the maximum pos. and neg. Measure Values are displayed (Walking Test). By pressing the switch again the values will be reset and starts again.
No zero drift
Therefore a zero adjustment is not needed before each measurement.
distance 1cm: 0 to 10kV
distance 2cm: 0 to 20kV
distance 5cm: 0 to 50kV
distance 10cm: 0 to 100kV
distance 20cm: 0 to 200kV
Dimensions: 122mm x 70mm x 26mm ( L x W x H )
Weight: approx. 130 g (without battery)
Power supply: 9V Alkali battery IEC 6F22
2-line alphanumeric LC-display with 12 digits each
The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line.
Scope of delivery:
9V Alkaline battery
grounding cable 1,5m
2 distance supports (2cm)
certificate of calibration
The VMS 023 consists of:
Voltage measuring head MK023
Stand for secure installation of the EFM.
Conductive plastic case to hold all accessories
5m silicone cable
All necessary connection cables