Matsusada AMJ-4B10 超速高压放大器 (±4kVdc, ±10mA, 9kHz)

Input: 185 ~ 264 VAC, 50/60 Hz, single phase

Output: 

Voltage: -4kV to +4kVdc

Current: 10 mA

Slew rate: 150 V/µs

Frequency Response(-3dB): DC to 9kHz

Output voltage control: External control voltage Vcon-in = -10 V to +10 V *1 (Input Impedance greater than 10 kΩ)

DC Bias: Front panel 10-turn potentiometer enables setting between -100% and +100% 

Regulation: 

Line : ±0.05% (115 V or 230 V ±10% input change)

Load : 0.05% (10% to 100% load change) 

Ripple:  < 0.01%

Stability: 0.016% / Hr typ

DC output voltage display: 3.5-digit digital meter

Output voltage monitor: 10 V to +10 V from front panel BNC terminal (Output impedance 1 kΩ)

Remote switch ON/OFF: Output ON / OFF with external contact signal (Short : ON, Open : OFF)

Protection: Over current protection with cut off, over voltage protection, output short circut,...

Operating Temp.: 0°C to +40°C

Storage Temp.: -20°C to +60°C

Humidity: 20% to 80%RH (no condensation) 

Accessories: 

Input AC cable 2.5 m (1)

Output HV cable flying lead 1.5 m (1) 

Instruction Manual (1)

Datasheet