Oscilloscope calibration Service

With the aim of serving customers with the best after-sales services, EMIN Vietnam has established the Equipment Inspection - Calibration - Repair Service Center. With the support from numerous equipment manufacturers in the world, EMIN Vietnam possesses well-prepared calibrating instruments. EMIN Vietnam has successfully repaired and calibrated specialized equipment in Vietnam, ensuring the quickness, effectiveness and convenience for customers. Only few technical trading company in Vietnam do possess this technical capacity including EMIN Vietnam.


>> Oscilloscope
- An oscilloscope is a measuring device capable of reading an electrical signal that changes over time and displaying it on a graph. The x axis represents time and the y axis represents voltage
>> Other information
>> Fuction
 * Besides basic features, the oscilloscope is packed with many useful features, helping you to quickly identify the frequency, amplitude and other characteristics of the waveform. In general, with an oscilloscope it is easy to measure the time and voltage characteristics of electronic devices.
>> Time characteristic
 * Frequency & Period: Frequency is defined as the number of repetitions of the waveform per second, and the period is the amount of time between those repetitions. The maximum frequency of each oscilloscope measured is different. Modern models can now measure frequencies up to high GHz.
 * Duty cycle: Percentage of the time the wave has a positive or negative result. Duty cycle is a rate that tells you how long the signal is in the positive and negative position
 * Rise time & Fall time: The signal wave cannot go from 0V to 5V immediately, it takes time to rise. The time a wave travels from a low point to a high point is called the Rise time and vice versa, it is called the Fall time. These features are important for reviewing and analyzing the speed of a signaling circuit
>> Voltage characteristic
 * Amplitude: Amplitude is a measure of the strength of a signal. The oscilloscope is packed with amplitude measurements such as peak-to-peak, which gives you the ability to analyze the differences between high and low voltage signals.
 * Maximum and minimum voltages (Maximum and minimum Voltages): An oscilloscope can easily tell you the maximum and minimum value of the voltage signal.
 * Mean and average Voltages: An oscilloscope can easily calculate the average value by calculating the maximum and minimum value of the voltage.

For further information about calibration service, visit our website at: https://emin.vn/en_US/calibration-inspection-service-985/pc.html

For further information and calibration requirements, Please contact

Equipment Inspection - Calibration - Repair Service Center - EMIN Vietnam JSC 

 Adress: No 11, Hoang Cau Moi Street, Trung Liet Ward Dong Da District, Ha Noi City

Email: hn@emin.vn - Hotline: 097.251.2864 (Mr. Truong)