Presure gauge calibration service

With the aim of serving customers with the best after-sales services, EMIN Vietnam has established the Equipment Inspection - Calibration - Repair Service Center. With the support from numerous equipment manufacturers in the world, EMIN Vietnam possesses well-prepared calibrating instruments. EMIN Vietnam has successfully repaired and calibrated specialized equipment in Vietnam, ensuring the quickness, effectiveness and convenience for customers. Only few technical trading company in Vietnam do possess this technical capacity including EMIN Vietnam.


>> Pressure Gauge
Pressure gauge is a device used to measure atmospheric pressure, when high above the low atmospheric pressure increases water and vice versa. It can measure the pressure exerted by the atmosphere using water, gas or mercury. The trend of pressure change can be forecasted in the short term weather forecast. Many measurements of barometric pressure are used in surface weather analysis to find grooves, high pressure zones ...


>> Other information

♦ Types of Pressure Gauge

> Water pressure gauge
 - The concept of "reducing atmospheric pressure for forecasting stormy weather" was invented by Lucien Vidie and is the foundation for a simple weather forecasting device called a barometer or "Goethe barometer". It contains inside a sealed glass tube, half filled with water. It has a narrow spout that sits below the water level and protrudes above the water's surface, and does not weld. When the atmospheric pressure is lower than the pressure when the manometer was sealed, the water level rises, and as the pressure increases, the water level drops. Variants of this type of manometer can be easily created at home [7].

> Mercury barometer

> Barometer box

> Barometric recorder

♦ Adjust the results

> Temperature

> Altitude

♦ Scope of use
 - During an energy audit, a Pressure Gauge is often used to determine the differential pressure between two points in the gas pipeline or exhaust air. Pressure difference is used to calculate the flow velocity of the pipe using the Bernoulli equation. (differential pressure = v ^ 2 / 2g)
 - More detailed ways of using the manometer are described in the section on how to use the manometer. However, a similar approach can be used to measure the pressure difference across two points in a pipeline containing any drains. In that case, it should be noted that the manometer should be suitable for use with the fluid flow rate.
The velocity of the fluid flow is calculated by:

Differential pressure = f LV^2 / 2gD

Include:
f is the coefficient of friction of the pipe material;
L is the distance between two pressure difference points;
D is the pipe diameter;
g is the gravity constant.

For further information about calibration service, visit our website at: https://emin.vn/en_US/calibration-inspection-service-985/pc.html

For further information and calibration requirements, Please contact

Equipment Inspection - Calibration - Repair Service Center - EMIN Vietnam JSC 

 Adress: No 11, Hoang Cau Moi Street, Trung Liet Ward Dong Da District, Ha Noi City

Email: hn@emin.vn - Hotline: 097.251.2864 (Mr. Truong)