Máy đo nhiệt độ kim loại nóng chảy Ajay Syscon Tempstick 62 (1750 oC, Wireless, PC)
Hãng sản xuất: Ajay Syscon Model: Tempstick 62 Xuất xứ: Ấn độ Bảo hành: 12 Tháng - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Ứng dụng: Dùng để đo nhiệt độ kim loại nóng chảy như thép, đồng, nhôm, gang, vàng, bạc
Có thể kết nối máy tính để in ra được kết quả nhiệt độ kèm ngày tháng
Bộ nhớ 1000 giá trị
Nhiệt độ hoạt động: 0º C to 50º C
Trọng lượng 5 Kg.
Kích thước: 63” x 24” x 10” (1544mm, 588, 245mm) (L x W x H)
Vỏ: Chống bụi, bằng nhôm
khoảng cách phát không dây: 50 m tới bộ hiển thị kế quả (chọn mua thêm bộ hiển thị kết quả từ xa)
Giải nhiệt độ: 540 oC - 1750 oC Cảm biến kiểu R tương ứng model R (Chọn mua thêm đầu TIP cảm biến R là vật tư tiêu hao chưa bao gồm)
Độ chính xác toàn hệ thống: ± 3°C
Nguồn: Pin 4Ni/Cd
Thời gian hồi đáp: 3-5 giây
Chọn mua thêm: Màn hình hiển thị từ xa wireless 560 USD
Chọn mua thêm cảm biết tiêu hao sau (khách hàng cần phải mua sẵn số lượng nhiều để đo, vì cảm biến sẽ hỏng sau 1 hoặc vài lần đo)
- Cảm biến BMD Tips (type R): Sử dụng đo trong điều kiện không xỉ (6-8 lần): 2.8 USD/1 cái
- Cảm biến TIP MINI (type R): Sử dụng đo trong điều kiện có xỉ (1 lần), Chiều dài có thể thay đổi (chọn kích thước khi đặt hàng 270 mm đến 570 mm): 3.6 USD 1 cái
- Cảm biến Mark VII (type R): Sử dụng đo trong điều kiện có xỉ (1 lần), Chiều dài có thể thay đổi (chọn kích thước khi đặt hàng 270 mm đến 570 mm): 3.6 USD 1 cái
Option Sensor Tip
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Type B (Platinum / Rhodium) Suited for high temperature measurements up to 1800°C. Unusually type B thermocouples (due to the shape of their temperature / voltage curve) give the same output at 0°C and 42°C. This makes them useless below 50°C. Type K (Chromel / Alumel) Type K is the 'general purpose' thermocouple. It is low cost and, owing to its popularity, it is available in a wide variety of probes. Thermocouples are available in the -200°C to +1300°C range. Sensitivity is approx 41uV/°C. Use type K unless you have a good reason not to. Type R (Platinum / Rhodium) Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/°C) and high cost makes them unsuitable for general purpose use. Type S (Platinum / Rhodium) Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/vC) and high cost makes them unsuitable for general purpose use. Due to its high stability type S is used as the standard of calibration for the melting point of gold (1064.43°C). |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch