For full functionality of this site it is necessary to enable JavaScript.

Thiết bị kiểm tra điện Chauvin Arnoux C.A 771 IP2X

- Hiển thị: LEDs
- Kiểm tra không có điện áp (VAT)
+ Điện áp: 12 Vac≤ U ≤ 1,000 Vac; 12 Vdc≤ U ≤ 1,400 Vdc
+ Tần số: DC, 16 2/3 to 800 Hz
+ Trở kháng: > 500 kΩ
+ Dòng điện đỉnh Max: 3.5 mA RMS
+ Chỉ thị cực: Có
+ Chỉ thị điện áp nguy hiểm :  ELV (điện áp cực thấp) LED thể hiện điện áp cao hơn SELV (điện áp cực thấp an toàn)
+ Dò điện áp phân tán: có
- RCD tripping: có (xấp xỉ 30 mA ở 230 V)
- Xác định dây trung tính/ pha: trên 50 V (45 - 65 Hz); trên 150 V (16 2/3 - 45 Hz)
- Thông mạch và điện trở
+ Ngưỡng kích hoạt buzzer: 100 Ω cơ bản (150 Ω max.)
+ Kiểm tra thông mạch mở rộng (điện trở): 2 kΩ, 60 kΩ, 300 kΩ
+ Dòng điện kiểm tra / Điện áp mạch mở : ≤ 1 mA / ≤ 3.3 V
- Xoay pha: Phương pháp 2 dây với bộ vi xử lý
+ Điện áp Ph/Ph : 50 V ≤ U ≤ 1,000 Vac (45 - 400 Hz)
+ Buzzer: Bíp ngắt quãng cho dò điện áp ; bíp liên tục cho thông mạch
+ An toàn điện: IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV
+ Cấp bảo vệ: IP65
+ Nhiệt độ: -30 °C to +60 °C (Class S)
+ pin: > 5,000 x 10 s measurements
+ Kích thước: 228 x 60 x 39 mm (without test probes) / khoảng 350 g

Thiết bị tiêu chuẩn : 1 hướng dẫn 5 ngôn ngữ, pin 2 x 1.5 V LR06/AA , 1 đầu dò kiểm tra IP2X Ø 4 mm, 1 dây đai Velcro.

Phụ kiện mua thêm
Đầu dò CAT IV cho VATs P01102123Z
Đầu dò Ø 2 mm cho VATs P01102124Z
Đầu dò Ø 4 mm cho VATs P01102125Z
Bảo vệ đầu dò cho VATs P01102126Z
Đầu dò CAT IV IP2X cho VATs P01102127Z
Đầu dò IP2X Ø 4 mm cho VATs P01102128Z
Túi MultiFix, 120 x 320 x 60 mm P01298076
Bộ chuyển đổi đo C.A 753   P01191748Z

Chi tiết

datasheet
user guider

Description

An essential tool for electricians to check that no voltage is present before working on any electrical installation connected to the network.

Compliant with IEC 61243-3 Edition 2,  the C.A 771 VAT can be used to work on any 1,000 V CAT IV installation. It is rated IP65 and offers a type-S extended climatic class for indoor and outdoor use, including in extreme conditions.

To meet the requirements of the standards in certain countries, this tester is available in two versions: equipped with IP2X test probes or without. The C.A 771 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50 VAC / 120 VDC.

Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2 buttons simultaneously.

The C.A 771's integrated Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads.

Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system. 

Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers unipolar phase identification.

The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E power sockets.

Specifications:

  • CAT IV 1,000 V
  • IP65
  • Full autotest
  • Voltage detection, LED display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
  • Frequency: DC, 162/3 to 800 Hz
  • Detection of stray voltages
  • Unipolar phase detection (a single contact)
  • Two-pole phase-sequence testing with 2-wire method = a third hand is not required
  • Continuity test with audible and visual indication (R < 100 Ω)
  • Extended continuity test with visual indication for R < 2 kΩ , 60 kΩ and 300 kΩ
  • RCD trip test
  • Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
  • Climatic conditions:-30 °C to +60 °C (Class S)
  • Battery life > 5,000 x 10 s measurements
  • Removable lead and test probe
  • Delivered complete and ready to use
  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi