Bộ kìm kẹp cho máy hiện sóng FLUKE I3000 FLEX-4PK (AC 3000 A, 50 kHz, bộ 4 cái, Dùng cho máy hiện sóng)
Hãng sản xuất: FLUKE Model: I3000 FLEX-4PK P/N: 2696367 Xuất xứ: China (Trung quốc) - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phạm vi dòng điện: 30 A,300 A, 3000 A AC rms
Độ nhạy đầu ra (ghép AC): 100 mV, 10 mV, 1 mV mỗi A
Trở kháng tải: tối thiểu 100 kΩ
Độ chính xác: ở +25°C ±1% phạm vi (45 Hz đến 65 Hz)
Độ tuyến tính: 0% đến 100% phạm vi ±0.2% giá trị đọc
nhiễu: 8 mV AC rms (30 A), 2 mV AC rms (300 A, 3000 A)
Dải tần số: 10 Hz đến 50 kHz (-3 dB)
Kết nối đầu ra: Cáp 0,5 m được kết thúc bằng đầu nối BNC an toàn. Được cung cấp kèm theo bộ chuyển đổi phích cắm an toàn 4mm
1 bộ bao gồm 4 cái kìm 3000A
Current ranges | 30 A |
300 A | |
3000 A | |
AC rms | |
Output sensitivity (AC-coupled) | 100 mV |
10 m | |
1 mV per A | |
Load impedance | 100 kΩ minimum |
Accuracy | at +25°C |
±1% of range (45 Hz to 65 Hz) | |
Linearity | 10% to 100% of range |
±0.2% of reading | |
Noise | 8 mV AC rms (30 A) |
2 mV AC rms (300 A, 3000 A) | |
Frequency range | 10 Hz to 50 kHz (-3 dB) |
Phase error | < ±1° (45 Hz to 65 Hz) |
±10° (at 20 kHz) | |
Position sensitivity (with cable > 25 mm from the coupling) | Position sensitivity: From 1% up to 3% of range with cable, depending on distance from the center (see figure left). Measurements closer than 25 mm from the coupling are typically greater than 3% of range. |
±2% of range | |
External field | with cable > 200 mm from the head |
±1% of range | |
Power supply | 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator |
Temperature coefficient | ±0.08% of reading per °C |
Working voltage | see safety standards section |
600 V AC rms or DC | |
General Specifications | |
Head circumference | 610 mm (24in) |
Head cable diameter | 14.3 mm (0.56in) |
Head bend radius | 38.1 mm (1.5in) |
Cable length (head to electronics) | 2 m (6.56 ft) |
Output connection | 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter |
Operating temperature range | -20°C to +90°C (-4°F to 190°F) (head) |
-20°C to +85°C (-4°F to 185°F) (electronics) | |
Strong temperature range | -40°C to +105°C (-40°F to 221°F) (head) |
-20°C to +85°C (-4°F to 185°F) (electronics) | |
Operating humidity | 15% to 85% (non-condensing) |
Weight | 180 g (0.396 lb) (head) |
190 g (0.419 lb) (electronics) | |
Safety standards | BS EN 61010-1: 2001 |
BS EN 61010-2-032: 2002 | |
BS EN 61010-031: 2002 | |
600 Vrms, Category III, Pollution Degree 2 | |
Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz | |
EMC standards | EN 61326: 1998 +A1, A2, and A3 |
Head cable length (double insulated) | 610 mm or 914 mm, depending on model |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch