For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

ADEX AX-1142N デジタル直流抵抗計 (0.00mΩ ~ 10MΩ±50.0%)

お問い合わせ
安全なチェックアウト
高品質な対応
簡単な交換・返品
配送対応可能

Range    Measuring range       Resolution      Measuring current        Accuracy

100mΩ 0.00mΩ~150.00mΩ 10μΩ                    100mA          within ±0.05% of rdg ±3digit

1000mΩ   0.0mΩ~1500.0mΩ        100μΩ               10mA                 within ±0.05% of rdg ±3digit

10Ω          0.000Ω~ 15.000Ω         1mΩ                10mA         within ±0.025% of rdg ±3digit

100Ω 0.00Ω~ 150.00Ω         10mΩ                 5mA                 within ±0.025% of rdg ±3digit

1kΩ          0.0Ω~ 1500.0Ω         100mΩ                 5mA                 within ±0.025% of rdg ±3digit

10kΩ 0.000kΩ~ 15.000kΩ 1Ω                         500μA         within ±0.025% of rdg ±3digit

100kΩ 0.00kΩ~ 150.00kΩ 10Ω                         50μA         within ±0.025% of rdg ±3digit

1000kΩ 0.0kΩ~ 1500.0kΩ         100Ω                 5μA                 within ±0.025% of rdg ±3digit

10MΩ 0.000MΩ~15.000MΩ 1kΩ                    0.5μA          within ±0.05% of rdg ±3digit

         5mΩ~10MΩ±50.0% 0.1% [5μΩ]         Refer to the above within ±0.2%±1digit


Open-circuit voltage of measuring terminal: 100mΩ~100Ω range:less than 5V

                                                                    1kΩ~10MΩ range:less than 15V

Measuring method: 4-terminal measurement (Contact check available)

Sampling time: [Free running mode] 5 times per second~10 times/sec.

[Remote start mode] about 15msec.~30msec.

Comparator set range: [Ω measurement] 4½ digit, both HI and LO (15000)

[% measurement] 50.0% (LO:0~-50.0%, HI:0~+50.0%)

Indication of comparator's comparison result: LED indication LO/GO/HI and buzzer

Control signal: Input:Remote start input

                                    Remote hold input

                Output:comparison signal (LO/GO/HI) 

                                       contact error signal (CE)

                                       completion of the measurement signal (EOC)

Operation condition [Temp.]: +5℃~+40℃ [Humidity] less than 85%

Power supply: AC100V~240V selectable, 50/60Hz, about 30VA

Outer dimension: about 260 (W) ×90 (H) ×250 (D) mm (excluding protruding parts such as rubber legs, etc.)

Weight: about 2.6kg

Catalog

お得な情報を受け取る

数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。

登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。

クイックサポート

認定専門家へ直接アクセス