Advanced Radar Analysis Application Note

With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals ta

With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology, tools and know-how.

In this Advanced Radar Analysis application note, you will learn how to reduce uncertainty while testing increasingly complex designs using Tektronix Arbitrary Waveform Generators, Real-time Spectrum Analyzers, and High-Bandwidth Oscilloscopes.

Tools for Measuring Modern Radar

In designing modern electronic warfare and radar systems, you will face significant challenges. You must develop solutions with the flexibility and adaptability required for next-generation threat detection and avoidance.

To succeed, you need capable tools for the generation and analysis of extremely complex pulse patterns and you need to validate designs with advanced scanning methodologies – tools that can handle complex radar baseband, IF and RF signals as well as identify multi-system interference.

This application note shows:

- Real examples of how to acquire and examine radar pulses, as well as unintended spurious and transient signals

- A look at how DPX can help you spot external threats like interference, jamming, and spoofing

- How the parameters of your desired pulse influence your simulation and test equipment selection

関連ニュース

2026年06月20日 10時53分11秒

What is the difference between sample homogenization and emulsification? Many people still confuse these two concepts.

What are the differences between sample homogenization and emulsification? Learn about the nature of each process, its operating principles, applications in food, cosmetics, pharmaceuticals, and how to choose the right equipment.

2026年06月19日 15時03分48秒

Why is the 6H/6g tolerance pair the most common in mechanical drawings?

Flip through detailed drawings or standard bolt documentation, and the designation 6H/6g appears very frequently. The external thread is machined slightly smaller than the nominal size, while the internal thread maintains its correct tolerance range.

2026年06月19日 11時17分36秒

What is the difference between coarse lace and fine lace? Which type is right for you?

What are the differences between coarse and fine threads? Learn about their characteristics, load-bearing capacity, vibration resistance, practical applications, and how to choose the right type of thread in mechanical engineering, machine manufacturing, and industrial production.

2026年06月19日 09時30分37秒

How do metric and inch thread gauges differ?

How do metric and inch thread gauges differ? Learn how to distinguish M10×1.5 from 1/2"-13 UNC, thread pitch, thread crest angle, and how to choose the correct GO/NOGO gauge to avoid damaging parts.

2026年06月18日 11時00分42秒

The Voltage Measures at 220V, but the Equipment Still Operates Abnormally?

A measured voltage of 220V does not necessarily mean the system is operating stably. When the multimeter display and actual equipment behavior begin to contradict each other, the inspection should be expanded to include load conditions, electrical contact quality, and waveform characteristics rather than repeatedly performing the same voltage measurement.