Back-to-Basic Measurement Workshop

We would like to invite you to "Back-to-Basic Measurement Workshop" which co-organized by GW Instek and EMIN Viet Nam

We would like to invite you to participate in "Back-to-Basic Measurement Workshop".

The workshop is co-organized by EMIN Vietnam and Good Will Instek (GW Instek). Good Will Instrument Co. Ltd. (GW Instek) has been a prestige manufacturer of testing and measuring equipment in the world since 1975, offers a wide range of products and solutions that enable accurate, long-term and reliable testing in the hardest testing environments.

Come to this workshop, you will know how to use optimally the equipments: Oscilloscope, Function generator, DC power and LCR meter . You will also be carefully guided to operate on the machine by foreign experts from GW Instek.

Toward the real experience, we chose the classroom layout, each three-person table has five instruments. Thus, you can have the opportunity to experience more real and better understand the information brought.

Time: 9:00 a.m - 4:30 p.m

Ha Noi city: 19, 20, 21 August
Ho Chi Minh City: 24, 25 August

Venue:

Hanoi: 4th floor, VIP3, Mipec Tower, 229 Tay Son, Ward Nga Tu So, District Dong Da, Hanoi, Vietnam
HCMC: Orchid 1, Ramana Saigon Hotel, 323 Le Van Sy, Ward 13, District 3, HCMC, Vietnam

Workshop Agenda:

9:00-9:20 Registration
9:20-9:30 Opening
9:30-10:45 Oscilloscope workshop (1 hr 15 min):
- Oscilloscope overview
- Control (vertical, horizontal, trigger)
- Measurement (manual, cursor, automated)
- Probe usage and compensation
10:45-11:00 Take a break
11:00-12:15 Function Generator workshop (1 hr 15 min):
- Function generator overview
- Signal generation (sine, square, pulse stream)
- Modulation
- Isolated channel
12:15-13:30 Lunch

13:30-14:45 DC Power Supply workshop (1 hr 15 min):
- Power supply overview
- Control (voltage, current)
- Cascading (series parallel)
- CC priority
14:45-15:00 Take a break
15:00-16:15 LCR Meter (1 hr 15 min):
- LCR overview
- Control (test function, voltage, frequency)
- Correction (open, short)
- Comparator (pass/fail)
16:15-16:30 Q&A

Any engineer, manager, scientist, academician or technocrat can attend this one day technical seminar.The audience

Note:

- All activities of the program are free, including lunch, tea-break
- Speaking in English
- Each delagate only can register 01 day.
Your participation is free of charge, but seats are limited. If you have any queries about this event, please do not hesitate to contact us.

Email: marketing@emin.vn

Tel: 024 35381 269
Mob: 0961531195 (Ms.Hanna)

We look forward to hosting you and your team members.

See GWinstek products here!

関連ニュース

2026年08月10日 15時39分24秒

Choosing Communication Interfaces for Test Equipment

A practical guide to selecting RS232, GPIB, LAN, USB, or Wi-Fi for test equipment based on connection range, networking needs, computer compatibility, and instrument control requirements.

2026年08月10日 14時16分08秒

Comparing Shore A and Shore D Hardness: Two Common Hardness Scales Today

Both Shore A and Shore D are used to measure material hardness, but each scale is suited to a different group of materials. Soft rubber, silicone, or elastic gaskets are typically tested using Shore A, whereas hard plastics, engineering plastics, and materials with low deformation are better suited to Shore D

2026年08月10日 11時17分47秒

What causes equipment to restart automatically in the factory, and how can the fault be identified?

Equipment restarts in a factory setting can be attributed to voltage sags, momentary power outages, electrical noise, overheating, or hardware faults. For incidents that last only a few power cycles, a power quality analyzer can capture voltage, current, and waveform data at the exact moment of the reset, thereby helping engineers determine whether the power supply is the cause

2026年08月10日 09時29分47秒

Oscilloscope and Multimeter FAQ for Practical Test Workflows

This FAQ explains basic oscilloscope concepts, key selection factors, the purpose of Bluetooth multimeters, and the practical difference between OW18B and B35T+ models.

2026年08月10日 09時28分50秒

Why Measured Amplitude Is Lower Than the Real Value

An oscilloscope can display a lower amplitude than the true signal when its bandwidth is not high enough. This article explains bandwidth, the 5x rule, and rise time in practical terms.