BAUR KSG 200 ケーブル識別システム (300 V, Max. 180 A)

For Cable Identification on Disconnected Cables 

Pulse Voltage: 300 V

Pulse Current: Max. 180 A

Pulse Sequence: 15 pulses/min

Power Supply 

Mains Voltage: 115/230/240 V, 50/60 Hz

Protection class: II 

Degree of Protection: IP40

Receiver

Sensitivity  

With Galvanic Impulse Coupling: 100% at a loop resistance of 400 Ohm (I = 0.75 A)

With Inductive Impulse Coupling: 100% at a loop resistance of < 6 Ohm

Load Current Range: 0 – 199 A ± 2%, 50/60 Hz 

Battery Life: Approx. 1.5 hours 

Display: LCD Display 

Power Supply: Automatic recharging in the holder of the transmitter 

Degree of Protection: IP52 

Dimensions (W x H x D): Approx. 100 x 25 x 211 mm 

Weight 

With Flexcoupler Ø 150 mm: Approx. 360 g

With Flexcoupler Ø 250 mm: Approx. 470 g

General Information on Cable Identification Systems in the KSG 200 Series 

Ambient Temperature (Operation): -10°C to +55°C

Storage Temperature: -20°C to +50°C

Case Dimensions (W x H x D): Approx. 594 x 174 x 435 mm

Weight of Case With Transmitter and Receiver:

Approx. 6.2 kg (without battery)

Approx. 7.7 kg (with battery)

Safety and EMC: 

CE Compliant in Accordance with:

Low Voltage Directive (2014/35/EU)

EMC Directive (2014/30/EU)

Environmental Testing EN 60068-2-ff

Standard delivery

KSG 200 cable identification system (for de-energised cables) 

Transmitter KSG 200

Receiver KSG 200

with flexcoupler ø 150 mm  

with flexcoupler ø 250 mm: Option

Connection cable 2 m, with connection clips 

Mains supply cord 1.8 m

Transport case for all components  

User manual  

Options

Clip-on current transformer AZ 10/D 70: Option  

Clip-on current transformer AZ 10/D 80: Option  

Clip-on current transformer AZ 10/D 125: Option

Datasheet