For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Bevs BEVS 3212 非接触自動色彩測定機(カスタマイズ製品) (X,Y: 10-500mm/s; Z: 10-100mm/s; 0.75 x 1mm)

お問い合わせ
安全なチェックアウト
高品質な対応
簡単な交換・返品
配送対応可能

Single measurement time: 0.2s

Min measurement interval: 0.2s

Min measurement area: 0.75 x 1mm

Max sample size: 180 x 180mm

X axis speed: 10-500mm/s

Y axis speed: 10-500mm/s

Z axis speed: 10-100mm/s

Accuracy of color meter: △E*ab<0.2

Repeated positioning accuracy of XY axis: 0.1mm

The distance between sample surface and measurement port of color meter: 1±0.2mm

Gross weight: 180 KG

Input electricity:  Voltage: 220V/50Hz

                           Power: 450W

Working temperature: 15-30℃

Humidity: 20-80% RH (No condensation)

Dimension: LxWxH (980x730x1550mm)

Introduction

BEVS Non Contact Automatic Color Measurement Machine (NCACM) is an intelligent and automatic non-contact color measurement system based on BEVS intelligent control system and spectrophotometer. It has high integration and scalability. BEVS NCACM is able to realize continuous and fast non-contact measurement and the efficiency increased by more than 60%. It can also reduce the damage and scratch when contacting the sample during measuring. BEVS NCACM has a more prominent advantage in measuring small sample,it can measure many samples at a time with fixture.

Construction












BEVS 3212 NCACM machine is mainly composed of color  measurement module, XY axis module, sample fixture, software interface display, PC case and electrical control cabinet. The color measurement module is composed of a spectrophotometer and a Z-axis motion module. The spectrophotometer is installed in the Z-axis module. The control system can control the upper and lower motion. The sample fixture is fixed on the XY-axis module. The control system can control the movement of the sample fixture at any point on the XY-axis plane.

Software System

Operator can control the spectrophotometer, BEVS automatic measurement control system and USB Camera by PC.

The functions of the software:

1) Calibration of Spectrophotometer, real-time control of color  measurement and data.

2) Programming control of BEVS automatic measurement and control system XY axis module positioning to coordinate (X, Y) points.

3) Connecting USB Camera to assist verification and positioning.

4) Programming measurement program

5) Real-time display of measurement results and save

6) Output testing report 








Order Information

BEVS 3212 Non Contact Automatic Color Measurement Machine

(Enable to customize upon requirements)

Datasheet

お得な情報を受け取る

数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。

登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。

クイックサポート

認定専門家へ直接アクセス