Chauvin Arnoux FTV100 太陽光発電設置分析器

Manuafacturer: Chauvin Arnoux
Model : FTV100
Item: P01160700
Warranty : 12 month

With 1 DC input 1 PAC10-FTV DC + 3 MN-FTV AC type clamps
- Display: Large 5.7” extra-bright digital colour LCD screen (320 x 240) with anti-re˜ ective treatment
Inputs
- Pyranometer
+ Functions: Solar irradiance measurement
+ Range :  2,000 W/m2
+Accuracy: ± 2 %
- Ambient temperature
+ Functions: probe for measuring the ambient temperature
+ Range : -30 to +80 °C
+Accuracy: ± 1 % ± 1 °C
- Temperature
+ Functions: Pt 100 probe for measuring the temperature of the solar panels
+ Range : -30 to +120 °C
+Accuracy: ± 1 % ± 1 °C
- DC voltage
+ Functions: 1 to 3 inputs
+ Range : 1,000 VDC
+Accuracy: ± 1 %
- DC current
+ Functions: 1 to 3 inputs
+ Range : 1,400 ADC
+Accuracy: ± 1 %
- AC voltage
+ Functions: 1 to 3 inputs
+ Range : 600 VAC
+Accuracy: ± 1 %
- AC current
+ Functions: 1 to 3 inputs
+ Range : 3,000 AAC
+Accuracy:  ± 1 %
Functions
- AC/DC power: 20,000 WDC / 1,200 WAC . Accuracy: < 2 %
- Calculation functions: efficiency of solar panels with compensation modules’ temperature coeficient. ency of DC / AC conversion by the inverter
- Data recorder: Up to 10 instrument con‡ gurations can be pre-recorded  in the memory (measurements and measurement results)
General Speci”cations
- Communication:  RS232 (to remote unit)+ USB (to PC)
- Internal power supply: Built-in Li-Ion rechargeable battery (4.5 Ah) / Battery life 8h
- External power supply:  Via 220 VAC – 50 Hz external power supply
- Protection: IP67 closed / IP54 open
- Electrical safety: IEC 61010-1 - 600 V CAT IV – 1,000 V CAT III
- Dimensions / Weight: 360 x 304 x 194 mm / 3 kg (with battery)

Delivered with IP67 site-proof case, 1 pyranometer for insolation measurement with 5 m cable, 1 Pt100 probe for ambient temperature with 3 m cable, 1 Pt100 probe for panel temperature with 3 m cable, 3 AC current clamps (MN-FTV) with 3 m cable, 1 DC current clamp (PAC10-FTV) with 3 m cable, 4 x 3 m leads with test probes, 1 rechargeable battery with mains adapter, data processing software, 1 carrying bag, 1 certi‡ cate of conformity, 1 SIT calibration certi‡ cate for the pyranometer.
Accessories
- 3-DC-input installation measurement kit  P01160710: Delivered with 2 PAC10-FTV current clamps and 3 m cable, 2 sets of leads with test probes (3 m)
- GREENTEST FTV100 REMOTE Unit  P01160736: Delivered with 4 x 1.5 V batteries, 2 male/male RS232 connectors for soldering, 1 fastening strap
- “Cable” communication kit P01160737: 15 m series cable, 9-pin male/male RS232 connectors
- “Bluetooth” communication kit P01160738:  2 Bluetooth adapters (transmitter/receiver), 2 male/female RS232 series cables 20 cm long, adapter programming software
- PAC10-FTV PAC DC clamp (200 ADC)   P01160734
- PAC20-FTV PAC DC clamp (1400 ADC)   P01120092
- MN13-FTV MN AC clamp (200 AAC)  P01160733
- C107-FTV Type C AC clamp (1000 AAC)   P01120337
- D43-FTV Type D AC clamp(3000 AAC)   P01120100
- Set of crocodile clips ø 4 mm (R/N) P01102052Z
- FTV100 battery P01160735

datasheet
user guider

Advantages

• Verification of solar-panel installations
• Calculation of solar-panel efficiency
• Calculation of inverter efficiency

Description

The FTV100 can be used to measure and display all the physical and electrical parameters of solar power installations simultaneously while also storing them

This highly-effective instrument can perform all the measurements needed to calculate the efficiency of the solar power installation:

• Electrical power survey
• Calculation of solar panel efficiency
• Calculation of inverter efficiency

The GREENTEST FTV100 has a large extra-bright 5.7" colour LCD screen with anti-reflective treatment making it particular easy to read in all circumstances. It is just as easy to set up as it is to use. Users install their physical measurement probes: a Pt100 probe for ambient temperature measurement, a Pt100 probe for the panel temperature and a pyranometer for the insolation. They then connect the voltage leads and current clamps and configure the FTV100 with the panel-manufacturer's parameters to serve as a reference. To transmit the measurement results remotely, the FTV100 has a remote module operating via a wired link (15 m) or via Bluetooth (100 m). In addition, the GREENTEST Report software can be used to acquire all the measurements in real time. At a glance, the display of the curves enables users to make an initial assessment of whether the installation is operating correctly or not. The software includes graphic analysis of the measurements and report printing.

Technical specifications

• Voltage up to 1,000 VDC / 600 VAC
• Current up to 1,400 ADC / 3,000 AAC
• AC/DC power: 20,000 WDC / 1,200 kWAC
• Data recorder: up to 10 instrument configurations can be prerecorded in the memory
• IEC 61010 600 V CAT IV – 1,000 V CAT III
• IP67 closed / IP54 open