Chotest PO40 工作機械プローブ (φ40 mm* L50mm)
メーカーChotest(このブランドの他の製品を見る)
ModelPO40
お問い合わせ
安全なチェックアウト
高品質な対応
簡単な交換・返品
配送対応可能
Size(Probe): φ40 mm* L50mm
Transmission Type: 360° IR
Transmission Distance: 5m
Rotational Speed: Max 1000rev/min
Triggering Direction: ±X/±Y/-Z
Repeatability of One-way triggering 2δ(*1): 1μm
Max overrun: XY:12.5mm +Z:6mm
Datasheet
Technical parameters of the receiver:
1) Transmission type: IR, 360°;
2) Working range: Max 8m
3) Weight: 926g
4) Input voltage: 12V~30V
5) Input current: <100mA, receiving <40mA;
6) Cable to machine controller: dedicated 13PIN shielded cable, 8 meters or 15 meters;
7) Storage temperature: (-25~70)℃,working temperature: (5~55)℃;
Description
Machine tool probe PO series applies 3-point trigger design which is the most stable structure. There is a trigger unit inside the probe. When the stylus is moved radially or axially by external force, the trigger unit is triggered. Then the circuit inside of probe sends a triggering signal to the receiver, and the receiver transmits it to the machine tool, consequently the present coordinates of each axis of the machine tool are recorded automatically. Finally measurement results are calculated according to the coordinate records of related points.
Application
◆ Coordinate setting: set datum point of workpiece, correct coordinate system of workpiece.
◆ Align workpiece: Inspect whether the workpiece is placed accurately, and whether the workpiece is deformed by force of clamping fixture.
◆ Dimension measurement: stage height, length, diameter
◆ Position measurement: holes distance, perpendicularity, angle, etc.
◆ Curved-surface measurement: blade shape, mold surface, complex shape
◆ After-processing inspection: Find the over-tolerance, correct tool compensation
◆ Check whether the workpiece is placed
お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス