EBP CM-110XYZ Automatic Saw for Metallographic Sample Preparation (500-3000rpm, Φ350×2.5×Φ32mm, Φ110mm)

Cut-off wheel: Φ350×2.5×Φ32mm

Maximum cutting section: Φ110mm

Control Method: Automatic, Three-axis Linkage, 7 inch Industrial Touch Screen Control

Features: Schneider Electric, Siemens PLC Software, Automatic Exhaust System, Alarm System, LED Lighting, Cursor Positioning

Cutting table size: 128x320mm (Right side); 180x320mm (Left side)

Maximum travel: Z axis: 130mm; Y-axis: 200mm; X-axis: 100mm

Rotation speed: 500-3000rpm

Control system: 7" colour touch screen, Siemens PLC control system

Cutting mode: Chopping cutting, flat push cutting, sweep Cutting

Cutting speed: 0.01-1mm/s (adjustable, each step 0.01mm)

Resetting mode: automatic

Feeding motor: Stepper motor

Cooling system: automatic water cooling 2 channels

Machine version: Vertical

Input power: 4KW

Input voltage: Three-phase Four-wire 380V 50HZ

Machine size: 1350x1100x1750mm

Standard delivery:

Machine body: 1 set

Water tank 80L (Including pump): 1 set

Cutting wheel (Φ350×2.5×Φ32mm): 2 pcs

Cutting Fluid: 1 L

Quick Clamp: 1 set

Water Inlet Pipe: 1 pc

Water Outlet Pipe: 1 pc

Exhaust Pipe: 1 pc

Cleaning water gun: 1 pc

Spanner: 1 set

Manual book: 1 pc

Large capacity multifunctional metallographic sample cutting machine, mainly used to cut cylindrical and polygonal and irregular general metallographic specimen materials such as tabs, the machine is a double hood fully enclosed structure and fast clamping mechanism. The machine is equipped with a fully enclosed double housing and a quick clamping mechanism to ensure that the specimen is cut in absolute safety. In order to avoid overheating during cutting and burning the specimen material, the machine is equipped with a strong cooling system, which can avoid micro-burns on the surface of the specimen when cutting down, increase the cutting cross-section, improve the utilisation rate of the cutting wheel, and has the advantages of easy operation, maintenance and maintenance.

Machine version: vertical. Machine are mainly made up of the upper (safety cover), the middle (frame), the right sliding door, the side hinged door, the lower frame (electrical box), clamps, rinsing water gun, cooling water tank (independent).