Eijkelkamp 11.03.45 Water level meter on a frame (100 m)

Applications

Water level measurements of electrically conducting liquids in boreholes, wells and tanks (in ATEX-free zones only) 

Long-term observations for periodic level soundings 

Continuous water level registration during pumping tests 

Additional sounding of well depths using the bottom sensor (accessory) 

Geohydrological research 

Water quantity research

Specifications

Range: 100m

Diameter (D) and /or size (L*W*H): Sensor D 15 mm, L 195 mm

Measured parameters: Level

Measuring principles: Conductivity

Power supply: Battery, 4x 1.5 volt DC (AA) with 2 years lifetime

Product material: Stainless steel and electroplated brass (easy to clean)

Safety class for probe: IP 68, permanently pressure resistant

Safety class measuring tape: IP 64, spray water resistant

Reading accuracy: 1 cm

Registration type: Manual

Recommended storage temperature:+5°C up to +30°C, for battery protection

Description

The water level meter is part of the standard equipment for measuring the groundwater level. This model has a strong and robust frame, but is still easy to carry. The probe is made of stainless steel and is connected to a long measuring tape with centimetre graduations, for easy read-out of the levels.

The probe gives a sound and light signal when it touches a conductive liquid. If the cable is then lifted slightly, the signal stops and the depth can be read directly from the measuring tape (accuracy: ± 1 centimetre). Royal Eijkelkamp's Water level meter is available in various lengths.

Brochure:

Manual: