Elcometer CG100ABDL+ 腐食厚さゲージ（B-スキャン、thrupaint、データロギング、A-スキャン、120 Hz） | EMIN.VN

Elcometer CG100ABDL+ 腐食厚さゲージ（B-スキャン、thrupaint、データロギング、A-スキャン、120 Hz）

Name: Elcometer CG100ABDL+ 腐食厚さゲージ（B-スキャン、thrupaint、データロギング、A-スキャン、120 Hz）
Brand: ELCOMETER

メーカーELCOMETER(このブランドの他の製品を見る)

ModelCG100ABDL+

お問い合わせ

数量

安全なチェックアウト

高品質な対応

簡単な交換・返品

配送対応可能

Measurement Mode: PE, PETP, EE, EEV, CT, PECT
A-Scan Display: + Rectified, - Rectified, Full Waveform (RF)
Display Refresh Rate: 120 Hz
Measurement Rate:
+ 4 readings per second
+ 50 readings per second
+ 6 readings per second
Measuring Range
+ PE: 0.63 - 508mm
+ PETP: 0.63 - 508mm
+ EEV: 1.27 - 25.4mm
+ PECT: 0.63 - 508mm
+ PECT: 0.01 - 2.54mm
Calibration Options: Single, two point, velocity & material type
Measurement Accuracy: ± 1% or ±0.1mm
Measurement Resolution: 0.01 mm
Velocity Calibration Range: 1250 - 9,999m/s
B-Scan display speed: 15 seconds per screen
Datalogging: yes
Transducer Frequency Range: 1 - 10MHz
Display: 1/8 inch VGA
Battery Type: 3 x AA alkaline
Battery Life: 150 hours
Operating Temperature: -10 to 60ºC
Size (w x h x d): 63.5 x 165.0 x 31.5mm
Weight (including batteries): 383g
RS232 Interface: Bi-directional
Packing List: Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable

Note: A transducer is not suppied with the Gauges, must be ordered separately

Manual

Datashet

Datasheet Transducer

CG100 Corrosion Thickness Gauges

With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.

The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.

Features:

Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
Time corrected gain (TCG)
Gate control
Threshold adjustment
64 User defined setups
Multiple language display
Multiple calibration and material selection options
High speed scan mode: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 16,000 readings and waveforms or B-Scans
Download to ElcoMaster^® data management software

CG100 Corrosion Thickness Gauges

Technical Specification

<td style="border:solid windowtext 1.0pt;mso-border-alt:solid windowtext .5pt; paddin

Model & Part Number	CG100B	CG100BDL	CG100ABDL	CG100ABDL+
Material thickness digits display	■	■	■	■
B-Scan cross sectional display	■	■	■	■
Combined B-Scan and digits display	■	■	■	■
Scan bar display	■	■	■	■
Coating thickness display	■	■	■	■
A-Scan Display			+ Rectified, - Rectified, Full Waveform (RF)	+ Rectified, - Rectified, Full Waveform (RF)
Measurement Mode	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT
Measurement Rate Manual: Scan mode Scan bar display	4 readings per second 50 readings per second 6 readings per second	4 readings per second 50 readings per second 6 readings per second	4 readings per second 50 readings per second 6 readings per second	4 readings per second 32 readings per second 6 readings per second
Measuring Range	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inches) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.001 - 0.100 inches)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inches) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.001 - 0.100 inches)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inch) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.0005 - 0.100 inch)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inch) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.0005 - 0.100 inch)
Measurement Accuracy	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater
Measurement Resolution	0.01mm (0.001 inches)	0.01mm (0.001 inches)	0.01mm (0.001 inches)	0.01mm (0.001 inches)
Velocity Calibration Range	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)
Additional Features: High speed scan mode	■	■	■	■
Differential mode	■	■	■	■
Limit alarm mode	■	■	■	■
B-Scan display speed	15 seconds per screen	15 seconds per screen	Adjustable display speed	Adjustable display speed
Flaw mode			Basic prove-up flaw detection using single element angle beam transducers	Basic prove-up flaw detection using single element angle beam transducers
Calibration setups	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates			3 fully adjustable gates: start, stop, width & threshold	3 fully adjustable gates: start, stop, width & threshold
Damping				Adjustable; impedance matching for optimising transducer performance
Pulser type	Dual square wave pulsers up to 140Hz pulse repetition rate	Dual square wave pulsers up to 140Hz pulse repetition rate	Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration	Dual 200 volt square wave pulsers with adjustable pulse width (spike, thin, wide) and 50 volt cut/boost for greater penetration
Gain	Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi	Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi	Manual, automatic gain control (AGC) with 110dB range (limited)	Manual, automatic gain control (AGC) with 110dB range (limited)
Timing	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer
Data logging		16,000 with B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations	16,000 with B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations	8,000 with A/B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations
Calibration Options	Single, two point, velocity & material type	Single, two point, velocity & material type	Single, two point, velocity & material type	Single, two point, velocity & material type
Transducer Probe Type	Dual element	Dual element	Dual element & flaw prove up	Dual element & flaw prove up
Transducer Frequency Range	1 - 10MHz	1 - 10MHz	1 - 10MHz	1 - 10MHz
Transducer recognition	Automatic & manual - selectable from a list	Automatic & manual - selectable from a list	Automatic & manual - selectable from a list	Automatic & manual - selectable from a list
V-path / dual path error correction	Automatic	Automatic	Automatic	Automatic
Probe zero	Automatic & manual (via integrated probe disk)	Automatic & manual (via integrated probe disk)	Automatic & manual (via integrated probe disk)	Automatic & manual (via integrated probe disk)
Display	1/8 VGA (grayscale) 62 x 45.7mm (2.4 x 1.8 inches) viewable area	1/8 VGA (grayscale) 62 x 45.7mm (2.4 x 1.8 inches) viewable area	1/8 VGA (grayscale) 62 x 45.7mm (2.4 x 1.8 inches) viewable area	1/4 VGA AMOLED colour display 57.6 x 43.2mm (2.27 x 1.78inch) viewable area
Display Refresh Rate	25Hz	25Hz	25Hz	120Hz
Units (selectable)	mm or inches	mm or inches	mm or inches	mm or inches
Backlight	on / off / auto	on / off / auto	on / off / auto	adjustable brightness
Repeatability / Stability Indicator	■	■	■	■
Battery Type	3 x AA alkaline	3 x AA alkaline	3 x AA alkaline	3 x AA alkaline
Battery Life (approximate)	150 hours	150 hours	50 hours	25 hours
Low Battery Indicator	■	■	■	■
Battery Save Mode	auto	auto	auto	auto
Operating Temperature	-10 to 60ºC (14 to 140ºF)	-10 to 60ºC (14 to 140ºF)	-10 to 60ºC (14 to 140ºF)	-10 to 60ºC (14 to 140ºF)
Size (w x h x d)