Elcometer CG70ABDL 腐食厚さゲージ（B-スキャン、A-スキャン、Thrupaint） | EMIN.VN

Elcometer CG70ABDL 腐食厚さゲージ（B-スキャン、A-スキャン、Thrupaint）

Name: Elcometer CG70ABDL 腐食厚さゲージ（B-スキャン、A-スキャン、Thrupaint）
Brand: ELCOMETER

メーカーELCOMETER(このブランドの他の製品を見る)

ModelCG70ABDL

お問い合わせ

数量

安全なチェックアウト

高品質な対応

簡単な交換・返品

配送対応可能

Measurement Mode: PEm, EE
A-scan: + Rectified, - Rectified, Full Waveform (RF)
Measurement Rate:
+ 4 readings per second
+ 32 readings per second
+ 6 readings per second
Measuring Range
+ PE: 0.63 - 254mm
+ EE: 2.54 - 102mm
Measurement Accuracy: ± 1% or ±0.1mm
Measurement Resolution: 0.01 mm
Velocity Calibration Range: 1250 - 9,999m/s
B-Scan display speed: 15 seconds per screen
Transducer Frequency Range: 1 - 10MHz
Display: 1/8 inch VGA
Battery Type: 3 x AA alkaline
Battery Life: 200 hours
Operating Temperature: -10 to 60ºC
Size (w x h x d): 63.5 x 165.0 x 31.5mm
Weight (including batteries): 383g
RS232 Interface: Bi-directional
Packing List: Elcometer NDT CG70ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable

manual

Datasheet

Datasheet Transducer

CG70 Corrosion Thickness Gauges

The CG70 range of corrosion thickness gauges with its large, easy to read display, provides users with A and B-Scan options for accurate interpretation of measurements.

The Elcometer CG70 corrosion thickness gauge is available in two models: CG70BDL and CG70ABDL. Both models offer 2D cross sectional block view, providing a graphical representation of a materials thickness, ideal for accurate analysis and identification of pits and corroded areas.

Features:

Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
Multiple calibration and material selection options
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
64 User definable setups
High speed scan: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 12,000 readings and waveforms or B-Scans
Download to ElcoMaster^® data management software

Model & Part Number	CG70BDL	CG70ABDL
Material thickness digits display	■	■
B-Scan cross sectional display	■	■
Combined B-Scan and digits display	■	■
Scan bar display	■	■
A-Scan display		+ Rectified, - Rectified, Full Waveform (RF)
Measurement Mode	PE & EE (ThruPaint™)	PE & EE (ThruPaint™)
Measurement Rate Manual: Scan mode Scan bar display	4 readings per second 32 readings per second 6 readings per second	4 readings per second 32 readings per second 6 readings per second
Measuring Range¹	PE: 0.63 - 254mm (0.025 - 9.999 inches) EE: 1.27 - 102mm (0.05 - 4.00 inches)	PE: 0.63 - 254mm (0.025 - 9.999 inches) EE: 2.54 - 102mm (0.100 - 4.00 inches)
Measurement Accuracy¹	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater
Measurement Resolution	0.01mm (0.001 inches)	0.01mm (0.001 inches)
Velocity Calibration Range	1250 - 9,999m/s (0.0492 - 0.3937in/μs)	1250 - 10,000m/s (0.0492 - 0.3936in/µs)
High speed scan mode	■	■
Differential mode	■	■
Limit alarm mode	■	■
B-Scan display speed	15 seconds per screen	15 seconds per screen
Flaw mode		Basic prove-up flaw detection using single element angle beam transducers
Calibration setups	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates		• PE: 1 gate; EE: 2 gates, 1 gate with hold off • Adjustable threshold
Pulser type	Square wave pulser	Square wave pulser with adjustable pulse width (spike, thin, wide)
Gain	PE: selectable low, medium or high gain EE: automatic gain control (AGC)	Manual or automatic gain control (AGC) with 40dB range (depending on mode selected)
Timing	20MHz with ultra low power 8 bit digitizer	20MHz with ultra low power 8 bit digitizer
Data logging	• 12,000 readings with waveform • Sequential and grid logging • Alpha numeric batch identifaction • OBSTRUCT indicates inaccessible locations	• 12,000 readings with waveform • Sequential and grid logging • Alpha numeric batch identifaction • OBSTRUCT indicates inaccessible locations
Calibration Options	Single, two point, velocity & material type	Single, two point, velocity & material type
Transducer Probe Type	Dual element	Dual element
Transducer Frequency Range	1 - 10MHz	1 - 10MHz
Transducer recognition	Manual - selectable from a list	Manual - selectable from a list
V-path / dual path error correction	Automatic	Automatic
Probe zero	Manual (via integrated probe disk)	Manual (via integrated probe disk)
Display	1/8" VGA (greyscale) 62 x 45.7mm (2.4 x 1.8 inch) viewable area	1/8" VGA (greyscale) 62 x 45.7mm (2.4 x 1.8 inch) viewable area
Units (selectable)	mm or inches	mm or inches
LED Backlight	on / off / auto	on / off / auto
Repeatability / Stability Indicator	■	■
Battery Type	3 x AA alkaline	3 x AA alkaline
Battery Life (approximate)	200 hours	200 hours
Low Battery Indicator	■	■
Battery Save Mode	Auto	Auto
Operating Temperature	-10 to 60ºC (14 to 140ºF)	-10 to 60ºC (14 to 140ºF)
Size (w x h x d)	63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)	63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
Weight (including batteries)	383g (13.5oz)	383g (13.5oz)
Aluminium case design with gasket sealed end caps, waterproof membrane keypad	■	■
Transducer Connector Type	LEMO	LEMO
RS232 Interface	Bi-directional	Bi-directional
<p style="margin-bottom:0in;margin-bottom:.0001pt;line-h

Elcometer CG70ABDL 腐食厚さゲージ（B-スキャン、A-スキャン、Thrupaint）

CG70 Corrosion Thickness Gauges

関連商品

関連商品