EMIN tham gia triển lãm NEPCON 2017 tại Trung tâm Hội chợ Triển lãm quốc tế I.C.E 91 Trần Hưng Đạo, Hà Nội

Thermal imaging helps inspectors assess radiant HVAC heating patterns by showing surface temperature differences. A 10–15 minute warm-up on a cold night can improve contrast, while 384x288 resolution or higher may help distinguish individual pipes.

Thermal imaging provides a non-contact way to inspect the thermal condition of petrochemical valves and flanges, helping identify anomalies associated with loose connections, faulty valves, and missing pipeline insulation.

Thermal cameras support building inspections by revealing temperature differences associated with thermal bridges, air leakage, moisture accumulation, and detached exterior tiles.

An infrared thermometer is a useful tool for quickly checking the surface temperature of lithium batteries without direct contact. This method allows technicians to identify abnormal temperature areas, assess operating conditions, and inspect battery systems during maintenance.

You are measuring an amplifier, and only one peak appears on the screen—even though there are clearly two carriers. Or, you know for a fact that harmonics are present, but the noise floor sits above them. Or, after making adjustments, the scanner slows down to the point where you find yourself waiting for each individual sweep. These three scenarios often share a common cause: the RBW (Resolution Bandwidth)