FLUKE FLUKE-RSE30/APAC Mounted Thermal Camera (-20 ℃ ~ 650 ℃)

Infrared resolution: 384 x 288

Detector type: Focal Plane Array (FPA), uncooled microthermal

Thermal Sensitivity (NETD): < 50 mk

Pixel spacing: 17 μm

Infrared spectral band: 7.5 μm to 14 μm

Field of View (FOV): Refer to lens parameter configuaration

Spatial Resolution (IFOV): Refer to lens parameter configuaration

Minimum focus distance: Refer to lens parameter configuaration

Lens focal length: Refer to lens parameter configuaration

Focus system: Auto

Temperature range: -20 ℃ to 650 ℃

Temperature measurement range: 

Subrange 1: -20 ℃ to 150 ℃

Subrange 2: 0 ℃ to 650 ℃

Accuracy: 15 °C to 35 °C, ±2 °C or ±2% of reading, whichever is greater

Global temperature measurement correction: Emissivity (0.01-1.00), Reflected Temperature (Background Temperature), Transmittance, Atmospheric Temperature, Relative Humidity, Target Distance

Area temperature measurement correction: Area Emissivity (0.01-1.00)

Analysis software: SmartView IR

Color palettes: 16 color palettes such as Iron, Grey and rainbow, palettes can be inverted

Image processing: Non-uniformity correction, intelligent gain control

Image mirror: Left-right, up-down, center

Video streaming compression standard: H.264

Video streaming:

Main streaming

Pixel: 384 x 288

Frequency: 30 Hz

Bandwidth: 1.8 Mb

Sub streaming

Pixel: 384 x 288

Frequency: 30 Hz

Bandwidth: 100 Kb

Fully-radiometric streaming: Yes. 30 Hz

Pan-tilt control: Support Pelco-D protocol

Temperature measurement area: Support temperature measurement points, lines and areas, support Modbus output (the Modbus output is mutually exclusive with the Pan-Tilt control)

Ethernet type: 10M/100M/1000M, adaptive

Network protocols: IPv4, UDP, TCP, RTSP, RTCP, RTP

Concurrent access: 10 channels for main streaming and sub streaming, 1 channel for fully-radiometric

Access standard: ONVIF

Power port: Terminal block, with fixed screw holes

Network interface: RJ45, with fixed screw holes and status indicator

Alarm input/output:

1 relay output: load capacity: 24 V, 1.5 A

1 optocoupled output: output capacity: 3.3-24 V, 35 mA maximum output current

1 channel optocoupled input: input capability: 3.3-24 V, 5 mA-15 mA input current

Serial port: 1 RS-485

Power supply: 12V to 24 V DC, PoE

Typical power consumption: 3 W

Operating temperature: -10 °C to 50 °C

Storage temperature: -40 ℃ to 70℃

Relative humidity: < 90%

Dimensions: 142.25 mm x 71 mm x 70 mm (Standard lens, without base)

Weight: 706 g (standard lens)

Mounting: 

Tripod mounting: 2 x 1/4-UNC-20 standard tripod mounting holes

Bottom and top mounting supported

Datasheet

Manual