FLUKE P3119-MPA High-Pressure Hydraulic Deadweight Tester (400 Mpa)

Pressure Ranges: 4 MPa ~ 400 MPa

Instrumental Measurement Uncertainty Specification

Standard accuracy: ±(0.02% of reading or 0.001% of range, whichever is greater)

Optional (Improved Accuracy): ±(0.015% of reading or 0.00075% of range, whichever is greater)

Materials of Construction

Standard weight materials: Series 3 non-magnetic austenitic stainless steel

Density: 7.8 g/cm³

Piston materials: Tungsten carbide with nickel binder

Cylinder material: Tungsten carbide with cobalt binder

Thermal coefficient of expansion: 11 ppm/°C

General Specifications

Test port adaptors: DH500. equivalent to HiP 60-xxxx high pressure fittings (60.000 psi) for 1/4” and 3/8” tube sizes

Weight: 23 lbs (10.5 kg)

Dimensions (W × D × H): 18” × 20” × 20” (457 mm × 508 mm × 508 mm)

Mass set weight: 100 lbs (45.5 kg)

Reservoir volume: 150 cc

Priming pump: Included with standard 3117, 3118 and 3119 models

Minimum weight increments: 2 bar, 0.2 MPa, 20 psi

Optional fine increment weights: Minimum increments of 0.2 bar, 0.02 MPa, 2 psi

Seal materials: Viton and Buna

Operating fluid: Sebacate, reference 3069551 (1 gallon standard)

Datasheet