Franklingrid CADD-5500 KIT Digital Battery Testing Kit (0.8 - 23.5 V; 100 - 19,990 Siemens)

Included in the kit: 

CELLTRON™ Advantage Digital

Belt loop

Battery pack (2)

Universal charger

Backpack

Free 90-day UNITE™ trial

1 meter USB cable

4' interchangeable cable

8' probe cable

Probe set

Probe tip replacements

Clamp set

Waffle replacements

Probe extender for 8' probe cables

Probe extender for 4' probe cables

Voltage Range: 0.8 - 23.5 Volts DC 

Conductance Range: 100 - 19,990 Siemens (Conductance testing voltage range 1V to 23.3V. Battery should be fully charged for best results.)

Test Data Storage: 50 string locations of 240 test results; Stored internally; Unlimited transfer to USB drive

Accuracy: +/-2% across test range, voltage & conductance

Voltmeter Resolution: 5mV

User Programmable Functions:

+ Preset values for over 250 battery types

+ Low voltage alarm setting

+ Low conductance warning

+ Low conductance failure

+ Test mode (pushbutton/auto start)

Cable Options: Dual contact clamps, Dual contact probes, Custom cables by quotation

Power Requirements: 7.2V, 2300mAh, NiMH; Internal swappable battery & charger

LCD Display: 

+ 2.97 in x 2.81 in (75.4 mm x 71.3mm)

+128 x 128 pixels

+ 40 degree viewing angle

+ LED backlight

Keypad: Alpha-numeric; Stainless-steel dome; Polycarbonate overlay; 1,000,000 actuations

Data Transfer: Wifi; USB 2.0 Flash Drive (Type A); USB 2.0 PC Interface (Type B); Half-duplex IrDA protocol for optional printer

Environmental Operating Range: 0 to +104°F (0 to +40°C); 95% relative humidity Non-condensing

Storage Temperature: -4 to 180°F (-20 to 82°C)

Over Voltage Protection: Auto-reset disconnect, Reverse polarity protected

Dimension: 11in x 4in x 3in (279mm x 105mm x 80mm)

Tester Weight: 2.6 lb (1 Kg)

Languages: English, Spanish, German, Polish, Portuguese, Dutch, Russian, French

Datasheet

Manual

Brochure