FUZRR FR2020B 三相デジタル位相電圧計 (0.00 ~ 600VAC , 0.0~ 100mAAC)

Function

Simultaneously measure three-phase AC voltage, current, phase between voltages, phase between currents, phase between voltage and current, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum, and determine the transformer wiring group , Inductive and capacitive circuits, test the secondary circuit and the bus differential protection system, read the phase relationship between the CTs of each group of differential protection, check whether the wiring of the watt-hour meter is correct or not, and repair the line equipment.

Power: DC3.7V large capacity lithium rechargeable battery

Power consumption: When the backlight is turned on, the maximum power consumption is 250mA, and the battery can work continuously for more than 5 hours.

Display mode: LCD display:71×52mm

Instrument size L/W/T：187*191*51mm

Voltage range: AC 0.00V～600V

Current range: AC 0.0mA～1000A

Phase range: 0.0°～360.0°

Frequency range: 45.00Hz～65.00Hz

Active power range: 0.0W～600kW

Reactive power range: 0.0W～600kVAR

Apparent power range: 0.0W～600kVA

Power factor range: -1～+1

Three-phase total power display: The line of “T” in the screen is the three-phase total power, total apparent power, total reactive power, and total power factor

Current vector sum: 0mA～3000A

Resolution

Voltage：AC 0.01V

Current：AC 0.1mA

Phase：0.1°

Frequency：0.01Hz

Active power:0.1W

Reactive power:0.1VAR

Apparent power:0.1VA

Power factor: 0.001

Current vector sum：1mA

Phase sequence

Positive phase: U1, U2, U3 or I1, I2, I3 cursors flash from left to right

Invert phase: U1, U2, U3 or I1, I2, I3 cursor flash from right to left

Detection rate: About 2 seconds/time

Data hold: Press HOLD key to hold data during test, “HOLD” symbol display

Data storage: 500 groups

USB interface: USB interface, uploading data to a computer for analysis of management data

Automatic shut-down: About 15 minutes after power on, the meter will automatically shut down to reduce battery consumption

Backlight function: Suitable for dim places and night use

Voltage detection: When the battery voltage is lower than 3V, the low battery voltage will display, remind to charge in time

Instrument quality

Hose：450g(including battery)

Large diameter current clamp：440g×3

Test line： 250g

Test line length: 1.5m

Current clamp line length: 2m

Working temperature and humidity: -10℃～40℃；below 80%Rh

Storage temperature and humidity: -10℃～60℃；below 70%Rh

input impedance: Test voltage input impedance is：2MΩ

Pressure resistance: The withstand voltage of 1000V/50Hz sine wave AC voltage between the instrument circuit and the housing lasts 1 minute

insulation: Between instrument line and housing≥100MΩ

structure: Double insulation

Suitable for safety regulations: IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，Pollution level2

Datasheet

Catalog