Genizer PilotGenizer-20k 高圧ホモジナイザー (45L/hr, 100mL, 20,000psi)

Flow Rate: 45L/hr 

Min. Sample:100mL

Max. Pressure: 20,000psi

Dimensions(cm): 145 × 75 × 50

Weight(kg): 260

Max. Temp.: 80ºC (176ºF)

Power: 380V/440V

Cleaning: Flush to clean/CIP/SIP

Application: Nano emulsion, fat emulsion, liposome, cell disruption, nano dispersion, deagglomeration

Features: Dual pump for continuous pressure, digital display of pressure

Standard Features

Parts: Y-type diamond interaction chamber with cooling option

Control System: High pressure programming control systems: touch screen, speed control, auto stop control by volume, time, pressure or temperature, settable volume control as low as 100mL, display of flow rate and time, overload protection

Pressure Gauge: Electric

Inlet Type: Tri-clamp or luer

Outlet Type: Tri-clamp or luer

Inlet Reservoir: 2L SUS316 cylinder

Product Material: 316L stainless steel, tungsten carbide, viton, teflon

Material Standard: Sanitary grade, FDA, GMP

PilotGenizer Pilot-scale High Pressure Homogenizer from Genizer LLC

The PilotGenizer is a pilot-scale ultra-high-pressure homogenizer and cell disruptor from Genizer LLC. It is electric-driven and gives formulation development experts more alternatives and capacities for cell disruption, emulsification and particle size reduction quickly and easily.

The PilotGenizer dual pumps system is based on a digital control design and is simple to use, with an auxiliary diamond chamber that helps pre-mix the sample and aids the nano-sizing procedure, as well as a primary diamond interaction chamber that disrupts the cell and reduces particle size. In the sample cooling unit, a 316 L stainless heat exchanger is employed to help cool the samples.

In addition, the Genizer PLC touch screen provides operators with multi-advanced features, such as auto-stop configuration (cycle numbers, set time and pressure) and precision sampling. 316 L stainless steel, 17-4 PH stainless steel, titanium alloy, tungsten carbide, PTFE, UHMWPE, or other corrosion-resistant materials are used on any parts that come into contact with the medium.

Main Features of the NanoGenizer:

l  Diamond interaction chamber technology

l  Flow rate: ~30 L/H at 30, 000 psi (water value)

l  Pressure: 15,000 psi - 45,000 psi

l  Sanitary dual pumps system

l  Control system: PLC touch screen, digital pressure value, auto-stop configurationMinimum

l  Application: Nano emulsions, liposomes, fat emulsions, nano dispersion, cell disruption, deagglomeration, graphene, and carbon nanotub

Technical Data:

Datasheet