Graphtec GL840M 60Vp-p 温度/電圧ロガー | EMIN.VN

Graphtec GL840M 60Vp-p 温度/電圧ロガー

Name: Graphtec GL840M 60Vp-p 温度/電圧ロガー
Brand: GRAPHTEC

在庫あり: 0 Unit

メーカーGRAPHTEC

ModelGL840-M

お問い合わせ

数量

安全なチェックアウト

高品質な対応

簡単な交換・返品

配送対応可能

Manufacturer: Graphtec
Model: GL840-M

Datasheet

The following shows how a standard configuration is expanded to more than 40 channels

Configuration for additional channels

Number of channels	20 channels	40 channels	100 channels	200 channels
GL840 unit (GL840-M or GL840-WV)	1 set	1 set	1 set	1 set
Connection cable(B-567-05 or -20)	N/A	1 pc	1 pc	1 pc
Terminal base (B-566)	N/A	2 sets	5 sets	10 sets
Input terminal (B-564 or B-565 )	N/A	1 set	4 sets	9 sets

Offers longer cable for the input terminals

Input terminal blocks can be connected directly(in daisy chain), or using the B-565 cable(s). This allows the input terminals to be placed in separate locations according to the need of the application.

The input terminal unit and the GL840 main body can be extended by using an extended connections cable.

*If the signal is affected by noise, It may be required to use a slower sampling.

GL840 Analog input specifications

Item			Description
Model number			GL840-M, Input terminal B-564	GL840-WV, Input terminal B-565
Input method			All channels isolated balanced input *11, Scans channels for sampling
Type of input terminal			Screw terminal (M3 screw)
Measurement range		Voltage	20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 100 V, and 1-5V F.S. (Full Scale)
		Thermocouple	Type: K, J, E, T, R, S, B, N, W (WRe5-26) Range: 100, 500, 2000 ºC *12
		RTD (Resistance Temperature Detector)	Type: Pt100, JPt100 (JIS), Pt1000 (IEC751) Range: 100, 500, 2000 ºC *12
		Humidity	0 to 100 % RH - using the humidity sensor (option B-530)
Filter			Off, 2, 5, 10, 20, 40 (moving average in selected number)
Measurement accuracy *13
Voltage			± 0.1% of F.S. (Full Scale)	± (0.05% of F.S. + 10μV)
Temperature (Thermocouple) *14
	Type	Measurement range (TS: Temp Sense)	Measurement accuracy	Measurement accuracy
	R	0 ≤ TS ≤ 100 ºC	± 5.2 ºC	± 4.5 ºC
		100 < TS ≤ 300 ºC	± 3.0 ºC	± 3.0 ºC
		300 < TS ≤ 1600 ºC	± (0.05% of rdg. + 2.0 ºC)	± 2.2 ºC
	S	0 ≤ TS ≤ 100 ºC	± 5.2 ºC	± 4.5 ºC
		100 < TS ≤ 300 ºC	± 3.0 ºC	± 3.0 ºC
		300 < TS ≤ 1760 ºC	± (0.05% of rdg. + 2.0 ºC)	± 2.2 ºC
	B	400 ≤ TS ≤ 600 ºC	± 3.5 ºC	± 3.5 ºC
	B	600 < TS ≤ 1820 ºC	± (0.05% of rdg. + 2.0 ºC)	± 2.5 ºC
	K	-200 ≤ TS ≤ -100 ºC	± (0.05% of rdg. + 2.0 ºC)	± 1.5 ºC
	K	-100 < TS ≤ 1370 ºC	± (0.05% of rdg. + 1.0 ºC)	± 0.8 ºC
	E	-200 ≤ TS ≤ -100 ºC	± (0.05% of rdg. + 2.0 ºC)	± 1.0 ºC
	E	-100 < TS ≤ 800 ºC	± (0.05% of rdg. + 1.0 ºC)	± 0.8 ºC
	T	-200 ≤ TS ≤ -100 ºC	± (0.1% of rdg. + 1.5 ºC)	± 1.5 ºC
	T	-100 < TS ≤ 400 ºC	± (0.1% of rdg. + 0.5 ºC)	± 0.6 ºC
	J	-200 ≤ TS ≤ -100 ºC	± 2.7 ºC	± 1.0 ºC
		-100 < TS ≤ 100 ºC	± 1.7 ºC	± 0.8 ºC
		100 < TS ≤ 1100 ºC	± (0.05% of rdg. + 1.0 ºC)	± 0.6 ºC
	N	-200 ≤ TS < 0 ºC	± (0.1% of rdg. + 2.0 ºC)	± 2.2 ºC
	N	0 ≤ TS ≤ 1300 ºC	± (0.1% of rdg. + 1.0 ºC)	± 1.0 ºC
	W	0 ≤ TS ≤ 2000 ºC	± (0.1% of rdg. + 1.5 ºC)	± 1.8 ºC
	R.J.C.		± 0.5 ºC	± 0.3 ºC
Temperature (RTD) *15
	Type	Measurement range (TS: Temp Sense)	Accuracy	Accuracy
	Pt100	-200 ≤ TS ≤ 100 ºC	± 1.0 ºC	± 0.6 ºC
		100 < TS ≤ 500 ºC		± 0.8 ºC
		500 < TS ≤ 850 ºC		± 1.0 ºC
	JPt100	-200 ≤ TS ≤ 100 ºC	± 0.8 ºC	± 0.6 ºC
	JPt100	100 < TS ≤ 500 ºC	± 0.8 ºC	± 0.8 ºC
	Pt1000	-200 ≤ TS ≤ 100 ºC	± 0.8 ºC	± 0.6 ºC
	Pt1000	100 < TS ≤ 500 ºC	± 0.8 ºC	± 0.8 ºC
A/D converter			Sigma-Delta type, 16 bits (effective resolution: 1/40000 of the measuring full range)
Maximum input voltage		Between (+) / (-) terminal	20 mV to 2 V range: 60 Vp-p, 5 V to 100 V range: 110 Vp-p
		Channels ((-) / (-))	60 Vp-p	600 Vp-p
		Channel / GND	60 Vp-p	300 Vp-p
Max. voltage (withstand)		Between channels	350 Vp-p (1 minute)	600 Vp-p
Max. voltage (withstand)		Channel / GND	350 Vp-p (1 minute)	2300 Vrms AC (1 minute)

*11

The terminal "b" for using the RTD is connected each other across all channels.

*12

If the specifications of the temperature sensor is lesser or greater than the selected measurement range, GL840
can measure up to the specifications of the sensor.

*13

Subject to the following conditions:

· Room temperature is 23 oC ± 5 oC.

· When 30 minutes or more have elapsed after power has turned on.

· Filter is set to 10.

· Sampling rate is set to 1 sec, using 20-channel in GL840-M and 10-channel in GL840-WV.

· GND terminal is connected to ground.

*14

Wire size of thermocouple used is 0.32mm diameter in the T type and 0.65mm diameter in other types.

*15

Supports 3-wire type sensor.

Options and Accessories

<td style="border:

Item	Model number	Description
Input terminal (Multi-inputs)	B-564	20ch input terminal, multi-input type
Input terminal (Withstand voltage	B-565	20ch input terminal, withstand-high-voltage type
Base unit for input terminal	B-566	Base unit for input terminal (B-564 or 566)
Connection cable for extension terminal	B-567-05	Cable to connect GL840 and B-566, 50 cm long
Connection cable for extension terminal	B-567-20	Cable to connect GL840 and B-566, 2 m long
Wireless LAN unit	B-568	WLAN adapter, IEEE802.11 b / g / n
Battery pack	B-569	Rechargeable Lithium-ion battery (7.2 V, 2900mAh)
Bracket for DIN rale (GL840 main body)	B-570	Bracket for DIN rail (GL840 main body), Build-to-order
Bracket for DIN rail (extension terminal)	B-540	Bracket for DIN rail (Input terminal), Build-to-order
Input/Output cable for GL series	B-513	2 m long (no clip on end of cable)
DC drive cable	B-514	2 m long (no clip on end of cable)
Humidity sensor	B-530	With 3 m long signal cable (with power plug)
Shunt resistor	B-551-10	250 ohms (it converts the signal to the "1-5V" from the "4-20mA".)
AC power adapter	ACADP-20	Input: 100 to 240 V AC, Output: 24 V DC
Temp & Humidity sensor	GS-TH	Temperature and humidity measurement
Illuminance & UV sensor	GS-LXUV	Illuminance and UV intensity measurement, cable 20cm long
Carbon Dioxide (CO2) sensor	GS-CO2	CO2 measurement, cable 20cm long
Acceleration & Temp sensor	GS-3AT	Acceleration and temperature measurement, cable 20cm long
Thermistor input terminal	GS-4TSR	Temp measurement (using a Thermistor), cable 20cm long
Thermistor sensor (Normal type)	GS-103AT-4P	Temperature sensor (-40 to 105 ºC), 3m long, 4pcs/set
Thermistor sensor (Ultrathin type)