GYS NEOPULSE 220 C MMA、TIG、パルスMIG-MAG溶接機 (1ph; 230V; 10-220A; no accessories)

The NEOPULSE 220 C is a single-phase pulsed MIG/MAG generator with digital technology. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/performance. Intuitive and highly functional, the digital interface allows for quick and easy modifications of the welding parameters. Fitted with an accurate and powerful 4 drive roll feeding system, the NEOPULSE 220 C offers manufacturers maximum productivity.

MULTI-PROCESS WELDING

+ MIG/MAG : 

- steel and stainless steel wire: Ø 0.6 to 1.0 mm

- aluminium wire: Ø 0.8 to 1.2 mm

- CuSi and CuAl wire: Ø 0.8 to 1.0 mm

+ MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 5 mm).

+ TIG DC Lift / Pulse.

SMART

+ SYNERGIC mode: After selecting 2 criteria (material/gas combination and the wire diameter), NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length).

ACCURATE

+ Calibration of the wire feed speed to adjust the displayed voltage measurement and refine the energy calculation.

+ Energie, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409.

+ Portability : load/backup user JOBS and machine configuration from a USB key.

+ Traceability : trace / record all welding steps, cord by cord, during industrial manufacturing in line with standard 

EN ISO 3834.

OPTIMISED MIG/MAG SETTINGS

+ Welding processes: Manual, Dynamic STD, Pulsed, Arc + Module (variation of hot / cold current) 

+ TACK modes: SPOT and DELAY.

+ Trigger options supported: 2T and 4T.

+ Precise control over the welding cycle : CreepSpeed, + Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

MAXIMUM PRODUCTIVITY

+ 4 microprocessors giving four times the processing power.

+ High productivity thanks to high duty cycle (150 A @ 60%).

+ Compatible wire reels: Ø 200 mm.

+ Powerful 4 roller wire-feeder for efficient wire feeding.

+ Very high arc voltage for easier ignition and exceptional arc dynamic.

INTUITIVE

+ New user friendly interface focused on welders’ navigation habits.

+ Update of the machine and synergies using a USB key.

+ Storage of 500 welding programs (can be saved on USB stick).

+ Displays current/voltage during and after welding (WPS/PQR).

+ Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).

+ Intelligent ventilation management to reduce power consumption, dust intake and noise.

+ Compatible torch Push Pull (24 V).

ROBUST AND MOBILE

+ Reinforced metal case & non slip rubber pads. 

+ IP23S case.

+ 2 handles for easier mobility.

Specifications:

Power supply: 230 V, 1 ph, 50/60 Hz

Fuse: 16 A

Rate current output: (MIG/MAG, TIG, MMA): 10-220 A

Duty cycle (environment temp. at 40°C):

   - MIG/MAG:

        @ 20 %: 220A/25V

        @ 60%: 150 A / 21.5 V

        @ 100%: 130 A / 20.5 V

   - MMA:

        @ 20 %: 220 A / 28.8 V

        @ 60%: 150 A / 26 V

        @ 100%: 120 A / 24.8 V

   - TIG:

        @ 25 %: 220 A / 18.8 V

        @ 60%: 160 A / 16.4 V

        @ 100%: 150 A / 16 V

Motor speed: 0.5 - 20 m/min, 4 rollers (2 motor)

Supported wire reels: Ø200mm

Wire diameter:

            + Steel/Inox: 0.6 - 1 mm

            + Aluminum: 0.8 - 1.2 mm

            + CuSi/CuAl: 0.8 - 1 mm

            + Cored wire: 0.9 - 1.2 mm

No-load voltage: 80 V

Protection level: IP 23S

Dimensions (L x w x h): 55 x 29 x 41 cm

Weight: 27 kg

Standard: IEC 60974-1/5/10 A

Original equipment (roller): 0.8/1.0 - B (steel, inox)

Choose optional accessories when ordering

Manual

Datasheet