Hantek HRDO4054C デジタルストレージオシロスコープ (4CH Oscilloscope; 500MHz)

Channel: 4-Channel Oscilloscope 

Bandwidth: 500MHz

Real-time Sampling Rate: 10GSa/s single channel, 10GSa/s half channel, 5GSa/s all channel

Memory Depth: 1Gpts (single channel), 500Mpts(dual channel), 250Mpts (three-four channels)

Waveform Capture Rate: 1,100,000 wfms/s

Vertical Resolution: 12-bit

Vertical Sensitivity: 1 MΩ： 500μV/div ~ 10 V/div；50 Ω：500μV/div ~ 1 V/div

Time Base Range: 500ps/div~1ks/div

Time Base Accuracy: ±1 ppm ± 1 ppm/year

Bandwidth limitation: 20 MHz, 200MHz; Independent optional for each channel

Trigger Type: Edge, Pulse, Video, Slope, Overtime, Window, Logic，Overamp, Runt, Pattern, Delay, Setup/Hold, Nth Edge, UART, LIN, CAN, SPI, I2C

Bus and Decoding: UART, I2C, SPI, LIN, CAN

Mathematical Operation: A+B, A-B, A*B, A/B, FFT, A&&B, A||B, A^B, !A, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, LowPass, HighPass, BandPass, BandStop, AX+B, Expression

Automatic Measurement: 51 kinds of parameter measurement, supporting statistics and analysis

Analysis Function: Frequency meter, DVM, Power Analyzer, Histogram, Search, Navigate, Record, Bode Set

Hardware Recording and Playback: More than 2 million frames (single channel)

Input Coupling: DC, AC or GND

Input Impedance and Capacitance: 1 MΩ ± 1%，50 Ω ± 1% ；18 pF ± 3 pF

Arbitrary Waveform Generator: 2-channel signal source, 16-bit vertical resolution, maximum output frequency 50 MHz, Sine, Square, Pulse, Ramp, Noise, DC, Sinc, Exp.rise, Exp.fall, Lorentz, Gauss, ECG, Haversine and other 13 standard waveforms

Digital Channel: 16CH, 1GSa/s sampling rate

Interface: USB HOST, USB DEVICE, LAN； option: HDMI, serial port

Screen: 10.1 inch multi-touch capacitive screen, 256 level waveform grayscale display, with color afterglow

Datasheet