HIOKI 3665-20 LANケーブルハイテスター | EMIN.VN

HIOKI 3665-20 LANケーブルハイテスター

Name: HIOKI 3665-20 LANケーブルハイテスター
Brand: HIOKI

在庫あり: 0 Unit

メーカーHIOKI

Model3665-20

原産地Japan

お問い合わせ

数量

安全なチェックアウト

高品質な対応

簡単な交換・返品

配送対応可能

- Measurable cable:

+ Twisted-pair cable

+ 100ohm characteristic impedance, shielded and unshielded,

+ CAT 3, 4, 5, 5e and 6

- Compatible connectors: RJ-45 plugs

- WireMap check: Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690

- Detectable errors: open, short, reversed, transposed, split pairs and other miswiring

- Cable length check:

+ Measurable lengths: 2 to 300 m, 6.6 to 984 ft

+ Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft

+ Display resolution: 0.1 m, 0.3ft

- Direction check: Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04

- Display: 128 x 64 dot matrix LCD (with backlight)

- Functions:

+ Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds)

+ Beeper: sounds when pressing buttons and when measurement results are displayed

Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed)

- Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press

- Battery Check: Battery indicator blinks when voltage falls below 2.4 V

- Unit Switch: Select between meters or feet

- Power supply: Two AA-size (LR6) alkaline batteries 1.4VA Approx. 50 hours

- Dimensions, mass: Approx. 85 W x 130 H x 33 D mm, approx. 160 g

- Accessories TERMINATOR 9690 (1),CARRYING CASE(1) (Stores the HiTESTER 3665-20 and TERMINATORs 9690)

Identify the 3 most important criteria for proper networking at a glance

Basic specifications

Measurable cable	Twisted-pair cable 100ohm characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6
Compatible connectors	RJ-45 plugs
WireMap check	Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690 Detectable errors: open, short, reversed, transposed, split pairs and other miswiring
Cable length check	Measurable lengths: 2 to 300 m, 6.6 to 984 ft Measurement accuracy: ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft Display resolution: 0.1 m, 0.3ft
Direction check	Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04
Display	128 x 64 dot matrix LCD (with backlight)
Functions	Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds) Beeper: sounds when pressing buttons and when measurement results are displayed Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed) Auto Power Save: the 3665-20 turns off automatically about 10 minutes after the last button press Battery Check: Battery indicator blinks when voltage falls below 2.4 V Unit Switch: Select between meters or feet
Power supply	Two AA-size (LR6) alkaline batteries 1.4VA Approx. 50 hours
Dimensions, mass	Approx. 85 W x 130 H x 33 D mm, approx. 160 g
Accessories	TERMINATOR 9690 (1) CARRYING CASE(1) (Stores the HiTESTER 3665-20 and TERMINATORs 9690)

	3665-20 product catalog.pdf (2.10 MB) (2010-07-20 updated)

関連商品