HUATEC TG-5700 超音波厚さ計 (0.15mm – 1800mm)

Probe Type: Single crystal probe / Double crystal probe

Measuring Range (45# Steel): 0.15mm – 1800mm

Indication Error:

<10mm: ±0.005mm

≥10mm: ±0.1%

Repeatability Error: ±0.001mm (Self test)

Measurement Frequency: 4Hz, 8Hz, 16Hz

Resolution: 0.1mm, 0.01mm, 0.001mm (0.01inch, 0.001inch, 0.0001inch)

Sound Velocity Range: 400 – 19999m/s

Pulse Generator: Negative square wave emission with automatic matching of pulse width and voltage to the probe

Calibration Block: 4mm (steel)

Automatic Shutdown Options: 5 minutes, 10 minutes, 20 minutes, or manual

Gain: Automatic gain control, Manual gain control

Gain Range: 0 ~ 70dB

Detection Modes: Radio frequency (RF), positive half wave (POS), negative half wave (NEG), full wave (FULL) 

Measurement Modes:

MB-E: Transit time from initial echo to first bottom echo

E-E: Penetration coating measurement

ME-E: Multiple echo measurement

THIN: Thin wall measurement

Numerical Modes:

Thickness value

Difference / Reduction rate

Maximum / Minimum value

Display: 3.5-inch QVGA (320 × 240) color TFT-LCD screen

Storage Capacity:

100,000 thickness values (100 groups, 1000 per group)

500 A-scan waveforms

500 B-scan waveforms

Data Transmission: USB3.0 serial communication

Working Temperature: -10℃ to +50℃ (can reach -20℃ under special requirements)

Working Voltage: Requires four AA batteries with low voltage prompt

Dimensions: 204 x 100 x 36 mm

Weight: 310g (without batteries)

Datasheet