(Full specifications can be found on datasheet)
Values 0.001 µF (100 nF) to 1000 µF
Stability as good as ±0.01 %/year
Two-to-five terminal configuration, depending on model
Calibration accredited to ISO-17025 included
datasheet
manual
BASIC SPECIFICATIONS
Calibration: A certificate of calibration that is accredited by A2LA to ISO-17025 is provided with each unit,
Calibration and Test Conditions: Calibrated at 23°C, <50% RH, Traceable to SI 1 nF - 1 μF: Units are calibrated as both 2-terminal and as 3-terminal capacitors. For 2-terminal measurements, the LO terminal is shorted to the GND terminal. The Adjustments to Nominal specified in the table above apply to 2-terminal measurements. 10 μF - 1000 μF: Units are calibrated as 5-terminal capacitors, "series model"
| Nominal value |
Model |
Adjustment to nominal |
Temperature coefficient(ppm/°C) |
Calibration frequency |
Dissipation(typical) |
Stability
(per year) |
Terminals |
Capacitor type |
| 1 nF |
1409-F |
±0.02% |
20 |
1 kHz |
0.0003 |
±100 ppm |
2 bp's + gnd |
Silvered Mica mechanically stabilized hermetically sealed |
| 10 nF |
1409-L |
±0.02% |
20 |
1 kHz |
0.0003 |
±100 ppm |
| 100 nF |
1409-T |
±0.02% |
20 |
1 kHz |
0.0003 |
±100 ppm |
| 1 µF |
1409-Y |
±0.02% |
20 |
1 kHz |
0.0002 |
±100 ppm |
| 10 µF |
1409-10µF |
±0.04% |
±50 |
100 Hz |
0.0005 |
±200 ppm |
4 bp's + gnd |
Metallized Polypropylene Sulfide (MPPS) hermetically sealed |
| 100 µF |
1409-100µF |
±0.05% |
±50 |
100 Hz |
0.001 |
±500 ppm |
| 1,000 µF |
1409-1000µF |
±0.4% |
-150 |
100 Hz |
0.001 |
±500 ppm |
