JBC DDSD-2QB Rework Station (230V, 90 ~ 450 ºC / 190 ~ 840 ºF, 200W)

DDE Control Unit

Nominal power: 200 W

Peak power: 150 W per tool

Selectable temperature: 90 to 450 °C / 190 to 840 °F

Idle temp. stability (still air): ±1.5 °C / ±3 °F, meets and exceeds IPC J-STD-001F

Temperature accuracy: ±3 % (using reference cartridge)

Temp. adjustment: ±50 °C / ±90 °F through station setting menu

Tip to ground vol. / resist.: Meets and exceeds ANSI/ESD S20.20 and IPC J-STD-001F

Ambient operating temp: 10 to 40 °C / 50 to 104 °F

Connections

USB-A: Firmware update, graphics and profiles, Dino-Lite USB microscope (models AM2011, AM2111)

USB-B: PC communication

RJ12: Fume extractor / peripherals / robot

MSE Module

Power: 42 W

Vacuum: 85 % / 640 mmHg / 25.4 inHg

Flow rate: 35 SLPM

Ambient operating temp: 10 to 40 °C / 50 to 104 °F

Pedal connector: Yes

Compliance

CE standards: Complies

ESD safe: Yes

Weight and Dimensions

Control unit dimensions: 232 × 148 × 120 mm

Control unit weight: 8.96 kg

Dimensions (inch): 9.13 × 5.83 × 4.72 in

Weight (lb): 19.74 lb

Product Composition

1 - DDE 2-Tool Control Unit

1 - MSE Electric Desoldering Module for DDE & DME

1 - T245 General Purpose Handle (cartridge not included)

1 - DT530 Angled Desoldering Iron (D530003 already inserted)

1 - ADS Stand for T210 & T245 Handles

1 - DTS Stand for DT530

1 - SCH Cartridge and Tips Holder

Datasheet