Jeiotech OV-12 真空オーブン（65L、250℃）

Microprocessor PID control
Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF.
Intuitive control panel with bright LED display (0.1℃ resolution) and touch-sensitive keypad
Over-temperature limiter / Door opening alarm.
Convenient presetting function for 3 most commonly used temperature settings
RS-232 interface
Chamber volume: 65L
Vacuum range: 0 ~ 0.1MPa, Analog
Temperature Range: Amb. +5 to 250 ℃
Temperature Fluctuation: ±0.3 ℃ at 100℃
Temperature Variation: ±3.7 ℃ at 100℃
Dimension Interior: 402×405×402 mm
Dimension Exterior: 780×557×595 mm
Weight: 103 kg
Power: 230V-50/60Hz/ 6.1A
Include: 3 Plate Shelve, 3.0mm (0.12˝)
Option: 
- Vacuum Pump TRP-6 
- Oil Mist Traps TMF -12
- Cold Trap Baths CTB-10

Download Cataloge Jeiotech

Operating features

• From +5℃ above room temperature to 250℃
• Vacuum range: 0 to 0.1MPa, analog gauge. (analog vacuum gauge)
• Microprocess PID control / Auto-tuning/ Calibration.
• Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF.
• Over-temperature limiter / Door opening alarm.
• Conveniently preset 3 most commonly used temperature settings without auto-tuning.
• Digital LED display (1℃ resolution) touch keypads
• RS-232 interface available

Constructional features

• Separate vacuum and vent ports: the narrow vent line controls the vacuum rate and inert.
(atmospheres slowly / the wider vacuum line to produce a vacuum quickly)
• Tight gasket seal and push-button latch.
• Block type heater distributes heat evenly from the chamber exterior to the anodized.
• Heat tempered spring load glass door gives a tight vacuum seal and convenient for continuous monitoring
   of samples.
• Moderately sized oven with user-friendly all-in-one control panel.
• Upon request available with Viton(Fluorine rubber) door gasket.(optional)

Option

Safety Covers In case of the glass is destroyed, the netted steel frame and polycarbonate sheet cover prevent user from glass splinters. Models Description Cat. No. OV-11 Safety Cover AAA13601 OV-12 Safety Cover AAA13602

Gaskets Viton (fluorine rubber) door gaskets can be provided upon request. Models Description Cat. No. OV-11 Silicone Gasket FAA5146 Viton (Fluorine rubber) Gasket FAA5187 OV-12 Silicone Gasket FAA5147 Viton (Fluorine rubber) Gasket FAA5188

Related products for Vacuum Ovens

Vaccum Pumps Rotary vacuum pumps with directly connected oil seal prevent air reflux and provide high vacuum pressure for vacuum ovens. And in order to get rid of evaporated oil or to block oil in-flow, an optional oil mist trap is recommended. (Refer to Page 69 for additional information.) CTB-10 cold trap baths equipped with two U-type glass traps prevent a vacuum pump from vapors or contamination. Models Description Cat. No. TRP-6 230V, 50/60Hz BEH73005K 120V, 60Hz BEH73006U Related accessory Oil Mist Trap BEH73501 ※ In addition to standard accessories, we can also provide customized accessories to meet your specific requirements. Please contact your local dealer for more details.

Cold Trap Baths Preventing vacuum pumps in a condition of vacuuming as a cold trap to exclude water (vapor). Included 2 U-type glass traps. (refer to Cold trab bath for more specific information) Models Electrical Requirements Cat. No. CTB-10 230V, 60Hz AAH62011K 230V, 50Hz AAH62012K Related accessory U-type Glass Trap AAA62501

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific    requirements.    Contact us for details.