Jeiotech T-14R ホットプレート

Temperature Range (℃ / ℉) Amb. to 350 / 662
Control    Feedback Control with PID / Scale
Display    LED digital (0.1℃ resolution)
Heating Power (W) : 600
Hot Top Indicator (℃ / ℉)    Warning lamp (50 / 122)
Over Temp.    Top plate Main body PCB
Over Current    Current limit protection
Timer    2 type, 1min to 99 hrs 59 min
Load, Max (kg / Ibs)    25 / 55.1
Material    Ceramic coated aluminum
Dimension (WxDxH, mm / Inch)    210x294x99 mm, 2.4kg
Electrical Requirements (230V,50Hz / 60Hz)    3 A

 

Heating Bath

transparent safety shield

 Clamp Holder (C-10,C-7,C-5)

Support rods

 

Operating Features

• Overheat prevention circuit turns off the heater if the top plate temperature reaches 450℃ for any reason.
• Hot Top Warning Indicator blinks when the top plate temperature is over 50℃ to prevent accidental injuries.
• Button Lock feature prevents inadvertent or accidental changes during operation.
• Microprocessor PID control for precise temperature.
• Automatic temperature calibration feature for precise temperature control.
• Three user-selectable temperature control modes provided:
  - Optimal Mode, Fast Mode, Slow Mode.
• Optimal heating level can be selected by turning the heater scale knob. (from 0 to 100%)
• Two user-selectable timer activation modes allowing the timer to start immediately after the timer setting or to be activated only when the set temperature is reached.

Constructional Features

• Integrated design of the heater and the top plate provides exceptional heat transfer rate and quick heat up capability.
• Non-slip heating bath with concavo-convex bottom prevents unintentional slips of the bath. (optional)
• A transparent safety shield protects users from liquid splashes or decoupled stir bars during operations. (optional)
• Two support rods allow for diverse flexibility in configuring other test equipments and accessories. (optional)