JISC MAX-T-100NM デジタルトルクテスター (100Nm)

 Maximum Capacity: 100Nm 

 4 sub range of capacity: 100Nm, 50Nm, 20Nm, 10Nm 

 Resolution: 0.01Nm, 0.01Nm, 0.001Nm, 0.001Nm 

 Accuracy: ± 1.0% of Applied Torque 

 Torque Cell Channel: 5 Channels (Able to input up to 5 torque cell) 

 Maximum Test Angle: ±36,000 Deg for Basic Model & ±7,200 Deg for High Grade Model 

 Resolution: 0.1 Deg for Basic Model & 0.01 Deg for High Grade Model 

 Angle Accuracy: ± 0.5Deg for Basic Model & ± 0.3 Deg for High Grade Model 

 Rotation: Rotary Table is Rotating 

 Rotation Speed: 1 ~7200 Deg/min 

 Unit: Nm / Ncm / kgf.m / kgf.cm / kgf.mm / gf.m /gf.cm / gf.mm 

 Display Size: CCFL Backlight LCD, W : 147 x H : 110mm 

 Data Storage: 100 Curves & Conditions per 1.44Mb 

 I/O Port: RS232C Interface, Digimatic Input, Analogue Output,Centronics Interface 

 Power Supply: Single Phase AC 200 ~ 240V (50/60Hz) 

 Power Rating: 300VA 

 Dimension: W570 x D480mm x H800mm 

 WEIGHT: Approx. 105kg 

CHARACTERISTICS

A TESTER WITH A COMPUTER

Max-T Series is a tester with intelligence. It computes the angletorque Etc. parameter, thus achieving precision results.

BUILT-IN USB Drive

The MAX series is a load tester with built-in USB Drive in it. Through this facility, you can store and save your job more conveniently

DISPLAYAND PRINTING

You can see the test results and curve of torque/angle on the high density LCD on the MAX tester and also the built-in printer can print out. The CENTRONICS INTERFACE (RS232C) enables outside printer to print test results out in form of test report.

DATA MAGNIFESTATION

Through the display, can show various data’s (biggest torque, specify the angle etc.); through the upper and lower limit, test values etc., the parameters can carry out quality’s judging conveniently

THE ENVIRONMENT MEMORY FUNCTION

Testing environment and conditions can be conveniently saved in the memory of the system, thus when you test the same product, can adjust to use the parameter in the memory conveniently, avoiding the hassle to set them again.

DATASHEET