KEYSIGHT 82357B USB / GPIBインターフェース高速USB2.0

Minimum system requirements: Refer to page 3 for requirements in using the Keysight IO Libraries

software (included with the instrument control hardware)

Supported standards:

– Supports USB 2.0 high speed

– Standard USB endpoints supported

– IEEE-488.1 and IEEE-488.2 compatible

– SICL and VISA 2.2

Unsupported GPIB modes of operation

– Pass Control

– Non-System Controller mode

General characteristics

Power USB: bus-powered device, +5 V, 500 mA (maximum), 200 mA (typical)

Maximum data rate (GPIB): 1.15 MB/s

Connectors 

– Standard 24-pin IEEE-488 (GPIB)

– Standard USB A

USB hubs: Self-powered hubs

Parallel polling: A single parallel poll can easily check up to eight individual devices

at once, corresponding to the number of data lines on the GPIB

Cable: 2.5 meters, shielded, connector rated for 1,500 insertions

LED indicators: READY, ACCESS, FAIL

Maximum instrument connection: 14 instruments—daisy chain via GPIB. A maximum of 4 converters

can be connected to the PC.

Configuration: Plug-and-play

EMC and safety 

– IEC 61010-1: 2001/EN 61010-1: 2001

– USA: UL61010-1: 2004

– Canada: CSA C22.2 No. 61010-1: 2004

Dimensions

Length, width, and height: 105 mm (L) x 64 mm (W) x 30 mm (H) (including connectors)

Weight: 215 grams

Environmental specifications

Operating environment: 0 °C to 55 °C

Operating humidity: Up to 90% at 40 °C non-condensing

Storage environment: –40 °C to 70 °C

Storage humidity: Up to 90% at 65 °C non-condensing

Ordering information

Accessories: GPIB cables/adapter

Datasheet