お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
For the determination of total sulfur in petroleum and petroleum products that are single-phase. These materials can include diesel fuel, jet fuel, kerosene, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasohol, and similar petroleum products. Also, for the determination of the total lead content of a gasoline.
Specifications
Conforms to the specifications of: ASTM D4294, D5059, D7220, ISO 20847, ISO 8754, IP 496, IP 336, JIS K 2541-1. Correlates to ASTM D2622
Excitation:
- 50 kV X-Ray Tube with Pd Anode
- 50W Maximum Power
- 4 Standard Polarization and Secondary Targets depending on application, for optimum excitation
- Optional Fifth Target for Optimal Excitation of Na and Mg
Detection:
- High Performance Silicon Drift Semiconductor Detector
- Peltier Electronic Cooling
- Optimum Balance of spectral resolution and high count rate
Detection limits (LLD):
- Sulfur: 0.54ppm
- Chlorine: 0.3ppm
- Lead: 0.0002g/L
- Nickel and Vanadium: 1ppm
- Iron: 2ppm
Sample chamber:
- Large 38cm dia. X 10cm deep sample chamber for bulk samples
- 15-Position Automatic Sample Changer (32mm Sample Cups)
- Analysis in Air, Helium Purge, or Vacuum Available
Electrical requirements: 100/240V, 1.4A, 50/60Hz Single Phase AC
Dimensions: WxDxH,in.(cm): 23.6x23.6x15.7 (60x60x40)
Net weight: 127 lbs (80kg)
