Labstac WO134 平均RO水システム

 Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: PF+AC+RO+AC

Ion rejection rate: 96%-99% (New RO membrane)

Organic rejection rate: >99% (when MW>200 Dalton)

Particles and bacteria rejection rate: >99%

Bacteria: <0.1 cfu/ml (with optional 0.45+0.1µm PES terminal filter)

Particles(>0.2µm): <1/ml (with optional 0.45+0.1 µm PES terminal filter)

Output(25°C)****: 125 L/hrs

Pure water outlet: RO water

Water Quality Monitor: Portable TDS/conductivity test pen + on-line conductivity monitor

DimensionLxWxH: 640×540×1110 mm

Weight: 70 kg

Standard configuration: Main body (Including 1 set of cartridges) + 2 built-in15 liters tank+ TDS pen +accessory bag

Power Consumption (W): 240 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. 

**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis. 

***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

Datasheet