お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Temperature: 5-45°C
Pressure: 1.0-4.0 Kgf/cm²
Flow Procedure**: PF+AC+RO+RO+AC+DI+TF
Bacteria: <0.1 cfu/ml
Output(25°C)****: 1st stage RO water: 63 L/hr, 2nd stage RO water: 30 L/hr
Pure water outlet: 2nd stage RO and Deionized water
DimensionLxWxH: 760×630×1190 mm
Weight: 80 kg
Standard configuration: Main body (Including 1 set of cartridges) + built-in 2 tank (40L PE tank+2 gallon pressure tank)+ accessory bag
Power Consumption (W): 300 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Resistivity: >10-18.2 MΩ.cm
Conductivity: -
Particle(>0.2µm): <1/ml
1st stage RO water's TDS: TDS (ppm, mg/l) < TDS of tap water x 5%
2nd stage RO water's conductivity: 1-5 µs/cm, Organic rejection rate>99% (when MW>200 Dalton), Particles and bacteria rejection rate>99%
Heavy metal ion: <0.1 ppb
