Laryee XRW-300NBN 熱変形ビカット軟化点温度試験機

Temperature control range: room temperature ~ 300℃

Temperature resolution: 0.1℃

Maximum temperature measurement error: ±0.5℃

Maximum temperature control error: ±0.5℃/6 minutes (50℃/h), ±1.0℃/6 minutes(120℃/h)

Heating rate: 50℃±5℃/h, 120℃±10℃/h or any set heating rate

Maximum deformation measurement range: 1.0mm

Maximum deformation measurement error: ± 0.001 mm

Thermal deformation test span: 64mm, 100mm, 101.6mm (D648 A method) other requirement can be customized

Radius of hot deformed indenter and support: R3.0 ± 0.02mm

Vicat needle area: 1.0 mm2

Vicat needle length: 3.0mm

Mass of load bar and tray: 76 ± 0.35g

Number of sample racks: 3 racks/4 racks/6 racks (optional)

Heating medium: methyl silicone oil (below 200 centistokes, flash point above 300℃, preferably 100 centistokes, flash point above 300℃)

Lifting method: electric lifting of sample holder and weight holder,

Cooling mode: natural cooling above 150℃, water cooling below 150℃

Power supply: AC220V, 50Hz, 3.4KW