Vertical System
Bandwidth	40 MHz
Rise time	8.8 ns
Input Channels	2
Bandwidth Limiters	20 MHz
Input Impedance	1 MΩ ± 2% \|\| 17 pF ± 3 pF
Input Coupling	AC, DC, GND
Maximum Input Voltage	± 400 Vpk
Channel-Channel Isolation	≥ 100:1 at 20 MHz
Vertical Resolution	8 bits
Sensitivity	2 mV/div - 5 V/div
DC Gain Accuracy	±3%: 5 mV/div - 5 V/div (fixed gain ranges) ±4%: 2mV/div and variable gain ranges
Offset Range	±2 V: 2mV/div - 100 mV/div ±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range	10 ns/div - 50 s/div
Clock Accuracy	100 ppm
Trigger and Interpolator Jitter	2 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch	500 MS/s on 1 Ch 250 MS/s on 2 Ch
Equivalent Sample Rate	25 GS/s
Memory	4 kpts/ch

Acquisition Modes
Averaging	Selectable Number of Sweeps: 4, 16, 32, 64, 128, 256
Peak Detect	10 ns
Interpolation	Linear, Sin x/x
Enhanced Resolution	na
Sequence Mode	na

Triggering System
Modes	Normal, Auto, Single, Stop
Sources	Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode	AC, DC, LF Rej, HF Rej,
Pre-trigger Delay	memory/(2 * sample rate)
Post-trigger Delay	260 Divisions
Hold-off by Time or Events	100 ns - 1.5 s
Internal Trigger Range	±6 divisions from center
Trigger Sensitivity	1 division: DC - 10 MHz 1.5 divisions: 10 MHz - 40 MHz
External Trigger Sensitivity	Ext: 200 mVpp from DC to 10 MHz 300 mVpp from 10 MHz to 40 MHz Ext/5: 1Vpp from DC to 10 MHz 1.5 mVpp from 10 MHz to 40 MHz
External Trigger Input Range	Ext: ±1.2 V, EXT/5: ±6 V

Display
Type	Color 5.7" TFT-LCD
Resolution	QVGA; 320 x 234 pixels
Grid Styles	YT (12 horizontal divisions), XY

Trigger Types
Optional Advanced Triggers	na
Optional Serial Data Triggers	na

Internal Storage
Waveform Storage	20 waveforms and 2 reference waveforms
Setup Storage	20 setups

Math
Number of Math Traces	1
Standard Math Functions	Add, Subtract, Multiply, Divide, FFT
Optional Math Functions	na

Measurements
Number of Measurements Displayed	5
Measurement Parameters	Amplitude, Average, Base, Burst Width, Cyclical RMS, +Duty Cycle, -Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, +Width, -Width, First Rising-Rising, First Rising-Falling, First Falling-Rising, First Falling-Falling, Last Rising-Rising, Last Rising-Falling, Last Falling-Rising, Last Falling-Falling

Probes
Probes	Qty. (2) ÷10/1 Passive Probes
Scale Factors	Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output	1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)	na
USB (Device)	1
Ethernet Port	na
USB (Host)	1
Serial Port	1

Power Requirements
Voltage	100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption	50 VA

Environmental and Safety
Temperature (Operating)	10 °C to 40 °C
Temperature (Non-Operating)	-20 °C to 60 °C
Humidity (Operating)	85% RH, 40 °C
Humidity (Non-Operating)	85% RH, 65 °C
Altitude (Operating)	3000 m
Altitude (Non-Operating)	15,266 m

Physical Dimensions
Dimensions (HWD)	154 mm x 305 mm x 133 mm (6" x 12" x 5.25")
Weight	2.3 kg (5 lbs)

Warranty and Service
Warranty and Service	3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

Teledyne LeCroy WaveAce 101オシロスコープ（40 MHz、250 MS / s、2チャンネル）

Vertical System

Horizontal System

Acquisition System

Acquisition Modes

Triggering System

Display

Trigger Types

Internal Storage

Math

Measurements

Probes

Interface

Power Requirements

Environmental and Safety

Physical Dimensions

Warranty and Service

関連商品

関連商品