Lignomat mini-Ligno DX Moisture Meter (5–65%)

Included: DX meter, 2 pairs of pins, measuring depth of 3/16″ and 7/16″ (5, 10mm). Cap, wrist strap and pouch, one 9V battery, manual and laminated wood species card.

Measuring Range: 5–65%, dependent upon wood species*

Display: Bright, light-emitting, digital LED display with 0.1% resolution below 10% and 1% steps above 10%. Most durable display with a lifetime warranty.

Wood Species Corrections

42 settings to correct for:

– domestic and tropical wood species

– bamboos, vertical, horizontal and strand

– laminates and wood-based panel products, OSB, AdvanTech…

Gypsum Corrections: 3 settings to correct for gypsum, drywall and wall boards (waterproof, exterior and interior) % scale

Reference Scale: 1 setting for non-wood building materials such as concrete, brick, plastic, insulation… Range 0–99. For Search and Compare Mode.

Calibration: Stable calibration, not affected by ambient temperatures. Built-in calibration check before each measurement with automatic adjustments if necessary. Accuracy for the lifetime of the meter. All mini-Lignos are calibrated for a wood temperature of 70°F (20°C). A correction table for other wood temperatures is listed in the manual.

Calibration Check: External calibration check block #TP is available to verify the calibration and functions of the meter, cable and electrode.

Size: Pocket-size 2 3/4″ x 5″ x 1″ (70 x 140 x 25 mm)

Weight: 8 ounces (200 g), made out of high-impact plastic.

Brochure

Manual