Live Webinar: Speed Up Your Production Test in Industrial 4.0

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible.

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible. Overall test time is a function of charge time, measure time, and discharge time, as well as the time to setup and process the test.

When a typical test program executes from a PC controller, it continually communicates back and forth with the test instrumentation. This communication time, whether it is over GPIB, LAN, USB, or some other protocol, is often one of the largest contributors to slower test times. Embedded test scripts minimize this communication time by storing and then executing entire test programs directly from the instrument’s non-volatile memory. All setup, decision-making, and data storage is now done from inside the instrument itself, independent of the PC.

Join us to learn about, what is a SMU and TSP. Experience the speed and power of the Keithley SMU and TSP, helping you in the new world of Industrial 4.0

DATE: 2/9/2020, Wed

TIME: 2:00 PM (GMT+8)

関連ニュース

2026年06月18日 11時00分42秒

The Voltage Measures at 220V, but the Equipment Still Operates Abnormally?

A measured voltage of 220V does not necessarily mean the system is operating stably. When the multimeter display and actual equipment behavior begin to contradict each other, the inspection should be expanded to include load conditions, electrical contact quality, and waveform characteristics rather than repeatedly performing the same voltage measurement.

2026年06月17日 16時16分58秒

What are ASTM Type I, II, and III Distilled Waters? What are the differences?

What is ASTM Type I, II, and III distilled water? Learn about the differences in purity, conductivity, resistivity, and applications of each grade of water used in laboratories, testing, research, and production.

2026年06月16日 11時38分58秒

What is the HRC (Hardness Rating) of Heat-Treated Steel? How to Accurately Read Hardness Results for Each Steel Grade?

What is the HRC hardness of heat-treated steel? Learn about the hardness of S45C, SCM440, and SKD11, how to evaluate HRC measurement rsults, and the reasons why steel may achieve incorrect hardness after heat treatment.

2026年06月15日 15時03分42秒

How do Rockwell, Brinell, and Vickers hardness differ? How to choose the right hardness testing method

Rockwell, Brinell, and Vickers are three of the most common hardness testing methods currently used. Learn about the differences in measurement principles, application ranges, and how to choose the right method for each type of material.

2026年06月15日 14時30分32秒

How do HRC, HRB, and HRA scales differ in hardness testing?

HRC, HRB, and HRA all belong to the Rockwell hardness system but are applied to different material groups. Understanding the differences between HRC, HRB, and HRA helps in selecting the correct testing method, accurately reading specifications, and avoiding unnecessary errors in material quality assessment.